PA-12 Weld On Aft Float Fittings

  P/N: 3143-12 Price: $735 per pair Eligible On: PA-12 and PA-14 Aircraft Series STC: SA00132SE FAA/PMA: Supplement 11 Weight: 2 lbs. per pair Material: 4130N Steel Purpose: Replaces clamp on style fittings. Provides cleaner and stronger installation. Installation: Normally accomplished at the time of re-build, however, the fabric can be removed to accommodate installation at other times. Misc. Information: Part includes swivel block for strut and swivel wire p...
More

Cowl Channel Attach Kit

  P/N: 18BC-CCAK Price: $117.50 Eligible On: PA-18 STC: N/A FAA/PMA: N/A Weight: 3.5 oz. Material: 304 Stainless Steel Purpose: Used to attach cowl channels to boot cowl. Installation: F. Atlee Dodge has added a back up angle to each location that is installed on the AFT side of the firewall. They are riveted or bolted onto the boot cowl skins to prevent the firewall from cracking. Kit includes 2 upper angles, 2 lower angles, and 2 lower back up angles. Click here...
More

Piper Muffler

  P/N: AD10308-003 Price: $685 each Eligible On: PA-12, PA-14, PA-16, PA-22, and PA-25 (S/N 722 and up) Series Aircraft STC: N/A FAA/PMA: N/A Material: Stainless steel Purpose: Exhaust system muffler. Installation: Same as stock muffler installation. Misc. Information: Supersedes P/N's 10308-000, 10308-003, 10308-00 and 10308-03. Repair station item only. Please send us your existing muffler via the carrier of your choice.  Part cannot be sold without the existing...
More

PA-12 Firewall Blanket

  P/N: AD12-FW-BLKT Price: $187.50 each Eligible On: PA-12 and PA-14 Aircraft Series STC: N/A FAA/PMA: N/A Weight: 13 oz. Material: Fabric is Naugahyde with fire block foam backing that self extinguishes and is also gas, grease, and oil resistant. Naugahyde material meets MUSS-302 flammability requirements. Foam backing meets UL-91 HF-1 flammability requirements. Fabric rated to -40 below. Purpose: Insulates firewall to reduce heat transfer and noise in the cabin. ...
More

DHC-2 Tiller Bar for Landplane

  P/N: AD-C2UT479A Price: $185 each Eligible On: DHC-2 Aircraft STC: N/A FAA/PMA: N/A Weight: 8 oz. Material: 6061 T6 Purpose: Allows tailwheel assembly to be connected to rudder cables. Installation: Same as original installation. Misc. Information: Powder coated gloss white. Custom fabricated per customer request. Drawing on file at F. Atlee Dodge.
More

DHC-2 Hydraulic Tank

  P/N: AD-CSUS761A Price: $865 each Eligible On: DHC-2 Ski Aircraft STC: N/A FAA/PMA: N/A Weight: 26 oz. Purpose: Reservoir tank for hydraulic ski's. Installation: Installed at the same time as hydraulic wheel ski's. Tank should be located on the inboard corner of the wing root. Misc. Information: Custom fabricated as per customer request. Drawing on file at F. Atlee Dodge.
More

Support Rod

  P/N: 3241-16 Price: $52.50 each Eligible On: PA-18 Series Aircraft STC: SA02273AK FAA/PMA: Supplement 2 Material: 304 Stainless Steel Purpose: Tailpipe support rod for PA-18 Hot Rod Muffler. Installation: Replaces Piper P/N 13003-00. Misc. Information: For use with PA-18 Hot Rod Muffler (P/N 3241-HR) and 3" clamps without pin (P/N AD-C-3000). 1 rod is needed per exhaust.
More

Silver Ski Springs

  P/N: 2097 Price: $165 each Eligible On: Approved Model List STC: SA4624NM FAA/PMA: Supplement 1 Weight: 2.2 lbs. Material: Cadmium Plated Steel Purpose: Improves ski rigging tension in cold weather. Installation: Installation instructions included with STC. Misc. Information: For ski equipped airplanes that have rigid welded tubular steel type main landing gear VNE equal to 160 MPH or less Maximum weight 2500 lbs.
More

DHC-2 Folding Center Row Seat

  P/N: 3180 Price: $3,665 each Eligible On: DHC-2 MK.1 STC: SA4613NM FAA/PMA: Supplement 1 Purpose: To allow for a 3 person middle row bench seat. Installation: Seat snaps in using standard attach brackets. Fits into original seat bases. Must have seat belt/cargo anchors installed in floor in accordance with  STC SA3617NM.  Misc. Information: Bench can be split to allow for a single seat at times. You can order the bench with a single seat on the left or right. You c...
More

Mandatory Service Bulletin Jump Seat Kit

  P/N: 3187-MSBKIT (full kit for 1 pair of seats) and/or 3187-MSBKIT2 (half kit for only 1 seat) Price: $115 per full kit, $57.50 per half kit. Eligible On: C170, C172, C175, C180, C182, and C185 Series Aircraft STC: SA02008AK FAA/PMA: Supplement 1 Purpose: To ensure existing jump seats comply with MSB 3187-I-01 rev A. Full Kit Includes: Copy of Mandatory Service Bulletin (MSB 3187-I-01 rev A) Copy of Airplane Flight Manual Supplement (AFMS 3187) Copy of Inst...
More

PA-18 Folding Front Seat – STC and Install Kit ONLY

  P/N: 3186-Kit or 3186-Install Price: $385 uninstalled, $845 installed Eligible On: PA-18 and PA-19 Series Aircraft STC: SA02085AK FAA/PMA: Supplement 1 Material: 4130 N Purpose: Allows existing pilot seat to be modified into a folding seat for easier loading of aircraft. Installation: Weld on modification to existing seat. Misc. Information: If you would like F. Atlee Dodge to install this kit for you, please send us your existing seat.
More

PA-14 Instrument Panel

  P/N: 1034-2 Price: $375 each Eligible On: PA-14 STC: N/A FAA/PMA: N/A Material: 2024 T3 Aluminum Purpose: Allows standard 6 pack instrument arrangement. Installation: Bolt on, no welding required. Misc. Information: Allows the carburetor and cabin heat controls to be moved from the cabin side wall to the instrument panel. The 6 pack panel is held in place with quick release fasteners allowing for fast and easy access during maintenance.
More

PA-12 Instrument Panel

  P/N: 1034-00 Price: $375 each Eligible On: PA-12 STC: N/A FMA/PMA: N/A Material: 2024 T3 Aluminum Purpose: Allows standard 6 pack instrument arrangement. Installation: Bolt in, no welding required. Misc. Information: Panels are installed with quick release fasteners allowing for quick and easy access during maintenance.  
More