Eligible On: Piper J3 thru PA-22 Series Aircraft
STC: SA3606NM
FAA/PMA: Yes
Weight: 8 oz. (3190-10, -11, and -12) or 13 oz. (3190-12-SKI)
Material: 4130N Steel, Powder Coated White or Black
Purpose: Used for refueling in the field
Installation: Please see Installation Instructions
Additional Information: Please measure the outside diameter of your landing gear tubes prior to placing your order. P/N: 3190-10 (for 1 1/4″ tube), 3190-11 (for 1 3/8″ tube), 3190-12 (for 1 1/2″ tube). Extra wide step available (P/N 3190-12-SKI) for 1 1/2″ diameter main landing gear tubes only. Step is extra wide for Bunny Boots. All refueling steps can be used on both right hand and left hand side.
Eligible On: Cessna 180H, 180J, A185E, A185F, U206, U206A, U206B, U206C, U206D, U206E, U206F, U206G, TU206A, TU206B, TU206C, TU206D, TU206E, TU206F, TU206G, P206, and TP206A Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 2 oz
Material: 2024 T3
Purpose: To reinforce Cessna Boot Cowl Steps and Handles (P/N’s 3354-S and 3354-H)
Installation: Please see Cessna Accessory Kit Information and Installation Instructions (AK172-168J).
Eligible On: Cessna U206, U206A, U206B, U206C, U206D, U206E, U206F, U206G, TU206A, TU206B, TU206C, TU206D, TU206E, TU206F, TU206G, P206, and TP206A Series Aircraft
STC: N/A
FAA/PMA: Yes
Weight: 7.3 oz
Material: 2024-T3, Powder Coated White
Purpose: Direct replacement for Cessna P/N 1242022-5
Installation: Please see Cessna Accessory Kit Information and Installation Instructions (AK172-168J).
Additional Information: This heavy duty replacement is fabricated to be wider than the original stock step.
Eligible On: Cessna 170 thru 170B, 180 thru 180F, and 185 thru 185E Series Aircraft
STC: N/A
FAA/PMA: Yes
Weight: 1 lb
Material: 4130N Stainless Steel, Powder Coated White
Purpose: Heavy duty replacement
Installation: Same as stock cabin step
Additional Information: Step is universal and can be used on left or right side. Fabricated from heavy duty wall tubing with added gussets to prevent fatigue and cracking.
Eligible On: Cessna 170 thru 170B, 180 thru 180F, and 185 thru 185E Series Aircraft
STC: N/A
FAA/PMA: Yes
Weight: 1 lb
Material: 4130N Stainless Steel, Powder Coated White
Purpose: Heavy duty replacement
Installation: Same as stock cabin step
Additional Information: Step is universal and can be used on left or right side. Fabricated from heavy duty wall tubing with added gussets to prevent fatigue and cracking.
Eligible On: Cessna 170 thru 170B, 180 thru 180F, and 185 thru 185E Series Aircraft
STC: N/A
FAA/PMA: yes
Weight: 1 lb
Material: 4130N Stainless Steel, Powder Coated White
Purpose: Heavy duty replacement
Installation: Same as stock cabin step
Additional Information: Step is universal and can be used on left or right side. Fabricated from heavy duty wall tubing with added gussets to prevent fatigue and cracking.
Eligible On: Cessna 180H thru 180K and A185E thru A185F Series Aircraft
STC: N/A
FAA/PMA: Pending Approval
Weight: 15.7 oz
Material: 4130N, Powder Coated White
Purpose: Replacement for Cessna P/N’s 0711710-1 and 0711710-2 used in Cessna step assemblies P/N 0711710-5 and P/N 0711710-6.
Installation: Bolt and rivet support to fuselage using fasteners as OEM part. Install your existing P/N 1510041-2 (left hand) and P/N 1510041-1 (right hand) step on the support using existing hardware.
Additional Information: Support is reinforced using an inner tube of 4130N making it stronger than OEM part.
Eligible On: Cessna 180H thru 180K and A185E thru A185F Series Aircraft
STC: N/A
FAA/PMA: Pending Approval
Weight: 15.7 oz
Material: 4130N, Powder Coated White
Purpose: Replacement for Cessna P/N’s 0711710-1 and 0711710-2 used in Cessna step assemblies P/N 0711710-5 and P/N 0711710-6.
Installation: Bolt and rivet support to fuselage using fasteners as OEM part. Install your existing P/N 1510041-2 (left hand) and P/N 1510041-1 (right hand) step on the support using existing hardware.
Additional Information: Support is reinforced using an inner tube of 4130N making it stronger than OEM part.
Eligible On: Piper J3 thru PA-19 Series Aircraft
STC: SA02007AK
FAA/PMA: Yes
Weight: 3 lbs
Material: 6061-T6 Aluminum, Powder Coated White or Black
Purpose: Assists with refueling, entering, and exiting aircraft.
Installation: Please see Installation Instructions
Additional Information: Before placing your order please measure the outside diameter of your FWD and AFT main landing gear tubes to ensure proper clamp sizes are included with your step.
Eligible On: Cessna 170, 172, 180, 182, 185, 206 and 207 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 5.6 oz
Material: Stainless Steel
Purpose: Refueling step that mounts onto the lift strut.
Installation: Please see Cessna Accessory Kit Information and Installation Instructions (AK172-168J).
Additional Information: This step is universal and can be installed on either side of the aircraft. This step comes in 3 sizes. Please measure the circumference of your strut in inches to determine the appropriate step for your aircraft (11 inches, 12 inches, 13.5 inches).