Eligible On: PA-12, PA-14, PA-18 and PA-19 Series Aircraft
STC: SA02188AK (covers PA-12 and PA-14) SA02152AK (covers PA-18 and PA-19)
FAA/PMA: Yes
Weight: 8.7 lbs per side
Material: 4130 N Steel Tubing (1 1/2″ OD forward tube, 1 3/8″ OD rear tube)
Purpose: Heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed.
Installation: Please see Installation Instructions for PA-12 and PA-14 and Installation Instructions for PA-18 and PA-19.
Additional Information: Main Landing Gear can be powder coated white, black, or gray for an additional $119 per side. Gear includes bushings installed in FWD and AFT upper attach fittings, as well as gussets and doublers supporting the lower legs. Gear does not include new hardware, axle nuts or brake lines. 1 1/4″ axle nuts are available for an additional cost of $26.50 each. Available with Airglas, Inc. hydraulic wheel ski brackets installed for an additional $743 per pair.
Eligible On: Piper PA-12, PA-14, PA-18, and PA-19 Series Aircraft
STC: SA02188AK (covers PA-12 and PA-14) SA02152AK (covers PA-18 and PA-19)
FAA/PMA: Yes
Weight: 8.7 lbs per side
Material: 4130N Steel Tubing (1 1/2″ OD forward tube, 1 3/8″ OD rear tube)
Purpose: Heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed.
Installation: Please see Installation Instructions for PA-12 and PA-14 and Installation Instructions for PA-18 and PA-19.
Additional Information: Main Landing Gear can be powder coated white, black, or gray for an additional $119 per side. Gear includes bushings installed in FWD and AFT upper attach fittings, as well as gussets and doublers supporting the lower legs. Gear does not include new hardware, axle nuts or brake lines. 1 1/2″ axle nuts are available for an additional cost of $26.50 each. Available with Airglas, Inc. hydraulic wheel ski brackets installed for an additional $743 per pair.
Eligible On: PA-12, PA-14, PA-18 and PA-19 Series Aircraft
STC: SA02188AK (covers PA-12 and PA-14) SA02152AK (covers PA-18 and PA-19)
FAA/PMA: Yes
Weight: 8.7 lbs per side
Material: 4130 N Steel Tubing (1 1/2″ OD forward tube, 1 3/8″ OD rear tube)
Purpose: Heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed.
Installation: Please see Installation Instructions for PA-12 and PA-14 and Installation Instructions for PA-18 and PA-19.
Additional Information: Main Landing Gear can be powder coated white, black, or gray for an additional $119 per side. Gear includes bushings installed in FWD and AFT upper attach fittings, as well as gussets and doublers supporting the lower legs. Gear does not include new hardware, axle nuts or brake lines. 1 1/4″ axle nuts are available for an additional cost of $26.50 each. Available with Airglas, Inc. hydraulic wheel ski brackets installed for an additional $743 per pair.
Eligible On: Piper PA-12, PA-14, PA-18, and PA-19 Series Aircraft
STC: SA02188AK (covers PA-12 and PA-14) SA02152AK (covers PA-18 and PA-19)
FAA/PMA: Yes
Weight: 8.7 lbs per side
Material: 4130N Steel Tubing (1 1/2″ OD forward tube, 1 3/8″ OD rear tube)
Purpose: Heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed.
Installation: Please see Installation Instructions for PA-12 and PA-14 and Installation Instructions for PA-18 and PA-19.
Additional Information: Main Landing Gear can be powder coated white, black, or gray for an additional $119 per side. Gear includes bushings installed in FWD and AFT upper attach fittings, as well as gussets and doublers supporting the lower legs. Gear does not include new hardware, axle nuts or brake lines. 1 1/2″ axle nuts are available for an additional cost of $26.50 each. Available with Airglas, Inc. hydraulic wheel ski brackets installed for an additional $743 per pair.
Eligible On: Piper PA-12, PA-14, and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Material: 4130N Steel Tubing
Purpose: Heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed.
Additional Information: Special Order only. Main Landing Gear can be powder coated white, black, or gray for an additional $119 per side. Gear includes bushings installed in FWD and AFT upper attach fittings, as well as gussets and doublers supporting the lower legs. Gear does not include new hardware, axle nuts or brake lines. 1 1/4″ axle nuts are available for an additional cost of $26.50 each. Available with Airglas, Inc. hydraulic wheel ski brackets installed for an additional $743 per pair.
These parts may be covered under STC SA550AL from Ron Sullivan for PA-12, STC SA538AL from Aircraft Innovations for PA-14, and STC SA540AL from David Hendrick for PA-18. Please contact the STC owners for more information on applicability.
Eligible On: Piper PA-12, PA-14, and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Material: 4130N Steel Tubing
Purpose: Heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed.
Additional Information: Main Landing Gear can be powder coated white, black, or gray for an additional $119 per side. Gear includes bushings installed in FWD and AFT upper attach fittings, as well as gussets and doublers supporting the lower legs. Gear does not include new hardware, axle nuts or brake lines. 1 1/2″ axle nuts are available for an additional cost of $26.50 each. Available with Airglas, Inc. hydraulic wheel ski brackets installed for an additional $743 per pair.
These parts may be covered under STC SA550AL from Ron Sullivan for PA-12, STC SA538AL from Aircraft Innovations for PA-14, and STC SA540AL from David Hendrick for PA-18. Please contact the STC owners for more information on applicability.
Eligible On: Piper PA-12, PA-14, and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Material: 4130N Steel Tubing
Purpose: Heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed.
Additional Information: Special Order only. Main Landing Gear can be powder coated white, black, or gray for an additional $119 per side. Gear includes bushings installed in FWD and AFT upper attach fittings, as well as gussets and doublers supporting the lower legs. Gear does not include new hardware, axle nuts or brake lines. 1 1/4″ axle nuts are available for an additional cost of $26.50 each. Available with Airglas, Inc. hydraulic wheel ski brackets installed for an additional $743 per pair.
These parts may be covered under STC SA550AL from Ron Sullivan for PA-12, STC SA538AL from Aircraft Innovations for PA-14, and STC SA540AL from David Hendrick for PA-18. Please contact the STC owners for more information on applicability.
Eligible On: Piper PA-12, PA-14, and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Material: 4130N Steel Tubing
Purpose: Heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed.
Additional Information: Main Landing Gear can be powder coated white, black, or gray for an additional $119 per side. Gear includes bushings installed in FWD and AFT upper attach fittings, as well as gussets and doublers supporting the lower legs. Gear does not include new hardware, axle nuts or brake lines. 1 1/2″ axle nuts are available for an additional cost of $26.50 each. Available with Airglas, Inc. hydraulic wheel ski brackets installed for an additional $743 per pair.
These parts may be covered under STC SA550AL from Ron Sullivan for PA-12, STC SA538AL from Aircraft Innovations for PA-14, and STC SA540AL from David Hendrick for PA-18. Please contact the STC owners for more information on applicability.
Eligible On: Piper PA-12, PA-14, and PA-18 Series Aircraft
STC: SA02188AK (covers PA-12 and PA-14), SA02152AK (covers PA-18)
FAA/PMA: Yes
Weight: 1 lb, 3 oz
Material: 4130N, powder coated white, black, or gray
Purpose: Required for 3″ Extended Length Main Landing Gear installations
Installation: Same as original stock part
Eligible On: Piper PA-12, PA-14, and PA-18 Series Aircraft
STC: SA02188AK (covers PA-12 and PA-14), SA02152AK (covers PA-18)
FAA/PMA: Yes
Weight: 1 lb, 3 oz
Material: 4130N, powder coated white, black, or gray
Purpose: Required for 3″ Extended Length Main Landing Gear installations
Installation: Same as original stock part