P/N: AD0713103-2
Price: $633.50 each
Eligible On: Cessna 180H, 180J, 180K, A185E, and A185F Series Aircraft
STC: N/A
FAA/PMA: Supplement 50
Weight: 2.8 lbs.
Material: Stainless steel, powder coated black.
Purpose: Direct replacement for Cessna P/N 0713103-2 and 0713878-5.
More
Author: steve
C180/185 V-Brace
P/N: AD0513003-19
Price: $633.50 each
Eligible On: Cessna 180, 180A, 180B, 180C, 180D, 180E, 180F, 180G, 185, 185A, 185B, and 185C
STC: N/A
FAA/PMA: Supplement 50
Weight: 2.8 lbs.
Material: Stainless Steel, powder coated black.
Purpose: Direct replacement for Cessna P/N 0513003-19.
Installation: Same as original stock part.
More
C185 Alternate Air Assembly
P/N: 8015-01
Price: $705.50 each
Eligible On: Cessna 185, 185A, 185B, 185C, 185D, 185E, and A185E with serial numbers 185 thru 18501832
STC: N/A
FAA/PMA: Supplement 9
Weight: 5.5 oz.
Material: Aluminum and Stainless Steel
Purpose: Direct replacement for Cessna P/N 0750174-3.
Installation: Same as original stock part.
More
Cessna Rudder Pedal Pivot Shaft
P/N: AD1460501-21
Price: $152 each
Eligible On: Cessna 150A, 150B, 150C, 150D, 150E, 150F, 150G, 150H, 150J, 150K, 150L, 150M, A150K, A150L, A150M, F150F, F150G, F150H, F150J, F150K, F150L, F150M, FA150K, FA150L, FA150M, 172D, 172E, 172F, 172G, 172H, 172I, 172K, 172L, 172M, 172N, 172P, F172D, F172E, F172F, F172G, F172H, F172K, F172L, F172M, F172N, F172P, FP172D, P172D, 172RG, R172K, FR172E, FR172F, FR172G, FR172H, FR172J, FR172K, 177, 177A, 177B, 180F, 180G, 180H, 180J, 180K, 182...
More
Cessna Arm – Alternator Adjusting
P/N: AD0750221-1
Price: $172.50 each
Eligible On: Cessna 180F, 180G, 180J, 180K, 182Q, 182R, F182Q, 185A, 185B, 185C, 185D, 185E, A185E, A185F, 206, U206, and P206 Series Aircraft
STC: N/A
FAA/PMA: Supplement 49
Weight: 6 oz.
Material: 4130N Steel with Zinc Plating
Purpose: Direct replacement for Cessna P/N 0750221-1.
Installation: Same as original stock part.
More
Cessna Spacer
P/N: AD0732101-7
Price: $69.50 each
Eligible On: Cessna 180A, 180B, 180C, 180D, 180E, 180F, 180G, 180H, 180J, 182, 182A, 182B, 182C, 182D, 185, 185A, 185B, 185C, 185D, 185E A185E, A185F, A188B, T188C, 210-5 (205), 210-5A (205A), 210, 210A, 210B, and 210C Series Aircraft
STC: N/A
FAA/PMA: Supplement 47
Weight: 0.2 oz.
Material: 4130N Steel with Zinc Plating
Purpose: Direct replacement for Cessna P/N 0732101-7
Installation: Per Cessna Service Manual
Misc. Infor...
More
Cessna Shroud
P/N: AD1250251-17
Price: $131.25 each
Eligible On: Cessna 210-5 (205), 210-5A (205A), 206, U206 thru U206F, P206 thru P206E
STC: N/A
FAA/PMA: Supplement 48
Material: Stainless Steel
Purpose: Direct replacement for Cessna P/N 1250251-17
Installation: Installs with screws, please consult Cessna Service Manual for further instruction.
More
PA-18 Mixture and Fresh Air Cable
P/N: 3310
Price: $54 each
Eligible On: Piper PA-18 Series Aircraft
STC: N/A
FAA/PMA: Supplement 1 (covers mixture) and Supplement 1 (covers Fresh Air)
Weight: 6.5 oz.
Material: Stainless Steel
Purpose: Direct replacement for Piper P/N 16775-00.
Installation: Same as original stock part.
Misc. Information: Cables are 60 inches in length and can be cut to size. Please see our selection of knobs here: Control Knobs.
More
Cessna Heat Shield for Engine Mount Vibration Isolators
P/N: AD1250918-2
Price: $172.50 each
Eligible On: Cessna U206A, U206B, U206C, U206D, U206E, U206F, U206G, P206A, P206B, P206C, P206D, P206E, TU206A, TU206B, TU206C, TU206D, TU206E, TU206F, TP206A, TP206B, TP206C, TP206D, TP206E, 207, 207A, T207, T207A, 210K, 210L, 210M, 210N, 210R, T210G, T210H, T210J, T210K, T210L, T210M, T210N, T210R, and P210N Series Aircraft
STC: N/A
FAA/PMA: Supplement 40
Weight: 5.3 oz.
Material: 304 Stainless Steel
Purpose: Direct replacemen...
More
C206/207 Nosegear Draglink
P/N: AD1243600-1
Price: $530.50 each
Eligible On: Cessna 206 and 207 Series Aircraft
STC: N/A
FAA/PMA: Supplement 44
Weight: 15.4 oz.
Material: 4130 N, powder coated white
Purpose: Direct replacement for Cessna P/N 1243600-1.
Installation: Same as original stock part.
More
C207 Breather Tube – Aft
P/N: AD1200106-166
Price: $376 each
Eligible On: Cessna 207, 207A, T207, and T207A
STC: N/A
FAA/PMA: Supplement 42
Weight: 4.2 oz.
Material: 5052-0 Aluminum
Purpose: Direct replacement for Cessna P/N 1200106-166
Installation: Same as stock part installation.
More
Cessna Breather Tube – Forward
P/N: AD1200106-108
Price: $376 each
Eligible On: Cessna 180F, 180G, 180H, 180J, 180K, 182H, 182J, 182K, 182L, 182M, 182N, 182P, 182Q, 182R, 185, 185A, 185B, 185C, 185D, 185E, A185E, A185F, 188, 188A, 188B, A188, A188A, A188B, U206, U206A, U206B, U206C, U206D, U206E, U206F, U206G, TU206A, TU206B, TU206C, TU206D, TU206E, TU206F, TU206G, P206, P206A, P206B, P206C, P206D, P206E, TP206A, TP206B, TP206C, TP206D, TP206E, 207, 207A T207, T207A, 210D, 210E, 210F, 210G, 210H, 210J, 210K, 2...
More
Piper Oversize Elevator
P/N: AD12770-OS
Price: $530.50 each
Eligible On: Piper PA-18, PA18S, PA-18 '105' (Special), PA-18S '105' (Special), PA-18A, PA-18 '125' (Army L-21A), PA-18S '125', PA-18AS '125', PA-18 '135' (Army L-21B), PA-18A '135', PA-18S '135', PA-18AS '135', PA-18 '150', PA-18A '150', PA-18S '150', PA-18AS '150', PA-19 (Army L-18C), PA-19S, FS 2002 Corp. (PA-14), and FS 2003 Corp. (PA-12, PA-12S)
STC: SA02433AK
FAA/PMA: Supplement 39
Weight: 4 lbs., 13 oz.
Material: 4130 N, powd...
More
Piper Oversize Rudder
P/N: AD15726-OS
Price: $602.50 each
Eligible On: Piper PA-18, PA18S, PA-18 '105' (Special), PA-18S '105' (Special), PA-18A, PA-18 '125' (Army L-21A), PA-18S '125', PA-18AS '125', PA-18 '135' (Army L-21B), PA-18A '135', PA-18S '135', PA-18AS '135', PA-18 '150', PA-18A '150', PA-18S '150', PA-18AS '150', PA-19 (Army L-18C), PA-19S), FS 2002 Corp. (PA-14), and FS 2003 Corp. (PA-12, PA-12S)
STC: SA02433AK
FAA/PMA: Supplement 39
Weight: 4 lbs., 2 oz.
Material: 4130 N, powd...
More
C180/185 Trim Wheel Shaft
P/N: AD0761205-9
Price: $193.25 each
Eligible On: Cessna 180 and 185 Series Aircraft
STC: N/A
FAA/PMA: Supplement 43
Weight: 0.5 oz.
Material: 4130 N, zinc plated to prevent corrosion
Purpose: Direct replacement for Cessna P/N 0761205-9
Installation: Same as original stock part
More
C206/210 Tailpipe Support Assembly (Early Models)
P/N: AD1250258-1
Price: $283.25 each
Eligible On: Cessna 206, U206A, U206B, U206C, U206D, U206E, P206A, P206B, P206C, P206D, P206E, 210B, 210C, 210D, 210E, 210F, 210G, 210H, 210J, 210K, T210F, 210-5 (205), and 210-5A (205) Series Aircraft
STC: N/A
FAA/PMA: Supplement 31
Weight: 2 oz.
Material: 304 Stainless Steel
Purpose: Direct replacement for Cessna P/N 1250258-1.
Installation: Same as original stock part.
More
CU206/210 Tailpipe Support Assembly (Late Models)
P/N: AD1250255-7
Price: $448 each
Eligible On: Cessna U206E, U206F, U206G, 210K, 210L, 210M, 210N, and 210R Series Aircraft
STC: N/A
FAA/PMA: Supplement 31
Weight: 3.4 oz.
Material: 304 Stainless Steel with rubber strap.
Purpose: Direct replacement for Cessna P/N 1250255-7.
Installation: Same as original stock part.
More
PA-18 Extended Baggage Compartment
P/N: 2103
Price: $916.75 each
Eligible On: PA-18 Series Aircraft
STC: SA590AL
FAA/PMA: Supplement 65
Weight: 7 lbs.
Material: .020 2024 T3 Aluminum
Purpose: Allows for more space in the baggage compartment. Extended compartment will provide approximately 4.25 cubic feet of storage space and has a weight capacity for up to 20 lbs.
Installation: Shipped in knock down form. Easily assembled using supplied pop rivets. No welding required.
Misc. Information: Early...
More
Cessna .1 Tapered Shim for Landing Gear Box
P/N: AD0441023-2
Price: $96.25 each
Eligible On: Cessna 150A, 150B, 150C, 150D 150, E, 150F, 150G, 150H, 150J, 150K, A150L, F150F, F150G, F150H, F150J, F150K, FA150K, 180F, 180G, 180H, 180J, 180K, 185, 185A, 185B, 185C, 185D, 185E, A185E, and A185F equipped with leaf spring landing gear.
STC: N/A
FAA/PMA: Supplement 30
Weight: 1.4 oz.
Material: 4130N Steel Plated and Heat Treated
Purpose: Direct replacement for Cessna P/N 0441023-2
Installation: Same as original...
More
Cessna .040 Shim for Landing Gear Box
P/N: AD0741022-1
Price: $33.50 each
Eligible On: Cessna 120, 140, 140A, 150A, 150B, 150C, 150D, 150E, 150F, 150G, 150H, 150J, 150K, A150L, F150F, F150G, F150H, F150J, F150K, FA150K, 170, 170A, 170B, 180, 180A, 180B, 180C, 180D, 180E, 180F, 180G, 180H, 180J, 180K, 185, 185A, 185B, 185C, 185D, 185E, A185E, A185F, 190, 195A, and 195B equipped with leaf spring landing gear.
STC: N/A
FAA/PMA: Supplement 30
Weight: .5 oz.
Material: 4130N Steel Plated
Purpose: Direct repl...
More
Cessna .050 Shim for Landing Gear Box
P/N: AD0741022-2
Price: $33.50 each
Eligible On: Cessna 180J, 180K, and A185F equipped with leaf spring landing gear.
STC: N/A
FAA/PMA: Supplement 30
Weight: .7 oz.
Material: 4130N Steel Plated
Purpose: Direct replacement for Cessna P/N 0741022-2
Installation: Same as original stock part.
More
PA-18 Aluminum Headliner
P/N: 18-HL
Price: $602.50 each
Eligible On: PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: Approximately 5lbs.
Material: 2024-T3 Aluminum
Purpose: To be used in place of cloth headliner.
Installation: Installation time estimated at 2 hours once cloth headliner has been removed. Aluminum headliner installs with P-K screws and blind rivets. Blind rivets are included with purchase. Screws are not included.
Misc. Information: Aluminum fabrication is more dur...
More
Cessna Bonding Strap for Engine Mount
P/N: AD0750137
Price: $25.25 each
Eligible On: Cessna
180, A, B, C, D, E, F, G, H, J, K
182, A, B, C, D, E, F, G, H, J, K, L, M, N, P, Q, R, T182
185, A, B, C, D, E, A185E, A185F
188, A, B, A188, A188A,
210, A, B, C, D, E, F, G, H, J, K, L, M, N, R
T210, G, F, H, J, K, L, M, N, R
R210NR, 210-5 (205), 2105A (205A)
STC: N/A
FAA/PMA: Supplement 41
Weight: 2.10 oz.
Material: .025 2024 T3
Purpose: Bonds engine to engine mount.
Installation: Direc...
More
Carbon Fiber Straight Ski’s
P/N: F.A.DODGEX-1
Price: $6,350.00 per pair, includes rigging
Eligible On: PA-12, PA-14, PA-18, and PA-19 Series Aircraft
STC: SA02421AK
TSO: TSO-C28
Weight: Approximately 35 lbs. per ski with rigging
Material: Pedestal is 4130N and powder coated flat black. Ski board is carbon fiber and ski bottom is UHMW.
Purpose: For landing and take off on snow and ice.
Installation: Please see Installation Instructions.
Misc. Information: Ski dimensions are 18.5" wide an...
More
Cessna Large Door Hinge Pin
P/N: ADS1426-1
Price: $35.50 each
Eligible On: Cessna (late style hinges)
STC: N/A
FAA/PMA: N/A
Weight: .4 oz.
Material: Stainless Steel
Purpose: Allows for quick removal and replacement of cabin door to load and unload cargo.
Installation: No tools needed.
Misc. Information: 1/8" diameter pin.
More
Piper Carburetor Heat Box
P/N: AD15005-00
Price: $1,169 each
Eligible On: PA-18150, PA-18A150, PA-18S150, PA-18AS150, PA-18105, PA-18S105, PA-18125, PA-18S125, PA-18A125 (Army L-21A), PA-18AS125, PA-18135 (Army L-21B), PA-18S135, PA-18A135, PA-18AS135 with Roger Borer's STC SA136AL, PA-19(Army L-18C), and PA-19S
STC: N/A
FAA/PMA: Supplement 28
Material: 304 Stainless Steel
Purpose: Direct replacement for Piper P/N 15005-00.
Installation: Same as original. Please reference Piper Owner Manual...
More
Cessna Leaf Gear Jack Pad for Ski’s
P/N: AD180-JP2A
Price: $118.50 each
Eligible On: Cessna Aircraft
STC: N/A
FAA/PMA: N/A
Material: Steel, powder coated red
Purpose: Lifts aircraft for installation and removal of aircraft ski's.
Misc. Information: Please consult aircraft owner or service manual prior to lifting aircraft.
More
Cessna Leaf Gear Jack Pad for Wheels and Tires
P/N: AD180-JP1A
Price: $74.75 each
Eligible On: Cessna Aircraft
STC: N/A
FAA/PMA: N/A
Material: Steel, powder coated yellow
Purpose: Lifts aircraft for installation and removal of wheels and tires.
Misc. Information: Please consult aircraft owner or service manual prior to lifting aircraft.
More
Survival Axe
P/N: AD18-SA
Price: $183.75 each
Eligible On: PA-18 and Husky style landing gear
STC: N/A
FAA/PMA: N/A
Weight: 4 lb's.
Purpose: Allows survival axe to be secured to outside of cabin structure.
Installation: Uses 2 clamps secured with stainless steel pins. 1 clamps on the forward landing gear tube, and the other clamps on the aft landing gear tube. Recommended to be mounted on left hand gear with axe head facing forward. The axe is not to be used as a step.
Misc....
More
Fuel Cap Keeper
P/N: 3267-KPR
Price: $25.25 each
Eligible On: Piper and Cessna Aircraft
STC: N/A
FAA/PMA: N/A
Weight: .4 oz.
Material: Stainless steel
Purpose: Retains fuel cap to prevent loss while refueling.
Installation: Clips on to small tab inside the fuel cap (if your cap does not have a small tab inside to clip to, this part will not work for you). No tools required.
Misc. Information: Chain is 7 inches long. Great for use on float planes as caps can fall into the wat...
More
Wing Jack
PN: AD18-WJ (with jack) or AD18-WJ-2 (without jack)
Price: $437.75 with jack, or $376 without jack
STC: N/A
FAA/PMA: N/A
Weight: 37 lbs. with jack
Material: 6061-T6
Purpose: Helps lift high wing aircraft lighter than 2500 lbs. for the installation and removal of skis or tires.
Misc. Information: If you choose to use your own jack a bushing will need to be installed in the lift bracket. We supply a modified high lift jack that can quickly be returned to normal opera...
More
C206/207/210 Heavy Duty Muffler Shroud – Left Hand
P/N: AD1250250-6
Price: $479 each
Eligible On: Cessna 206, P206, P206A, P206B, P206C, P206D, P206E, U206, U206A, U206B, U206C, U206D, U206E, U206F, U206G, 207, 207A, 210K, 210L, 210M, 210N, P210N (SN 21059200 through 21064135), 210-5 (205), and 210-5A (205A) Series Aircraft
STC: N/A
FAA/PMA: Supplement 27
Weight: 1.9 oz.
Material: 304 Stainless Steel
Purpose: Heavy duty direct replacement for Cessna P/N 1250250-6.
Installation: Same as original stock part.
...
More
Piper Shock Struts – 3″ Extended Length
P/N: 3164-3 (PA-18) and 3164-4 (PA-12 and PA-14)
Price: $123.50 each
Eligible On: Piper PA-12, PA-14, and PA-18 Series Aircraft
STC: SA02188AK (covers PA-12 and PA-14), SA02152AK (covers PA-18)
FAA/PMA: Supplement 25 (covers PA-18), Supplement 1 (covers PA-12 and PA-14)
Weight: 1 lb., 3 oz.
Material: 4130N, powder coated white, black, or gray.
Purpose: Required for 3" Extended Length Main Landing Gear installations.
Installation: Same as original stock part.
...
More
Piper Main Landing Gear Safety Cables – 3″ Extended Length
P/N: 3344 (PA-18) or 3344A (PA-12, PA-14)
Price: $198.25 per kit
Eligible On: PA-12, PA-14, and PA-18 Series Aircraft
STC: SA02190AK (covers PA-12 and PA-14) SA02189AK (covers PA-18)
FAA/PMA: Supplement 1
Weight: 2.9 lbs.
Material: Stainless steel plates and galvanized cables.
Purpose: Prevents main landing gear from collapsing should a landing gear component fail.
Installation: Please see Installation Instructions. It is recommended to use new AN hardware when ...
More
Piper Main Landing Gear – Standard Length with 1 1/4 Axle
P/N: 3225-1 (left hand) and 3225-2 (right hand)
Price: $504.75 per side
Eligible On: J3, PA-11, PA-18, and PA-19 Series Aircraft
STC: N/A
FAA/PMA: Supplement 1
Weight: 8.4 lbs. per side
Material: 4130N Steel Tubing
Purpose: Heavy duty replacement for Piper P/N's 00041-60/61, 10033-00/01, and 10033-051/06.
Installation: Same as stock landing gear.
Misc. Information: Main Landing Gear can be powder coated white, black, or gray for an additional $87.50 per side....
More
Piper Lumber Rack
P/N: 12-LR (for PA-12 and PA-14 Series Aircraft) or 18-LR (for PA-18 Series Aircraft)
Price: $798.25 each
Eligible On: Piper PA-12, PA-14, and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 20 lbs. without load
Material: Mild steel, powder coated black.
Purpose: Allows for external loads such as construction materials.
Installation: Please see Installation Instructions.
Misc. Information: Pilot/Operator shall determine the load configuration prior to fli...
More
C206/207 V-Brace
P/N: AD1242001-18
Price: $633.50 each
Eligible On: Cessna All 206, U206, TU206, 207, and T207 Series Aircraft
STC: N/A
FAA/PMA: Supplement 24
Weight: 2 lbs.
Material: Stainless steel, powder coated black.
Purpose: Direct replacement for Cessna P/N 1242001-18.
Installation: Same as original stock part.
More
Cessna Lift Strut Steps
P/N: 3354-11, 3354-12, and 3354-13.5
Price $87.50 each
Eligible On: Cessna 170, 172, 180, 182, 185, 206 and 207 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 5.6 oz.
Material: Stainless Steel
Purpose: Refueling step that mounts onto the lift strut.
Installation: Please see Cessna Accessory Kit Information and Installation Instructions (AK172-168J).
Misc. Information: This step is universal and can be installed on either side of the aircraft. This step comes i...
More
EDO Float Pulley
EDO Float Pulley with Bracket
P/N: AD60-W-911
Price: $19 each
Eligible On: EDO Floats
STC: N/A
FAA/PMA: N/A
Material: Aluminum bracket with nylon pulley
More
EDO Float Pulley with Eye Bolts
P/N: AD60-W-911-1
Price: $54 each
Eligible On: EDO Floats
STC: N/A
FAA/PMA: N/A
Material: Aluminum bracket with steel eye bolts and nylon pulley
More
Cessna Small Door Hinge Pin
P/N: ADS1426-2
Price: $32.50 each
Eligible On: Cessna (early style hinges)
STC: N/A
FAA/PMA: N/A
Weight: .2 oz.
Material: Stainless Steel
Purpose: Allows for quick removal and replacement of cabin door to load and unload cargo.
Installation: No tools needed.
Misc. Information: 3/30" diameter pin.
More
Northern Companion Engine Pre-Heaters
P/N: NC5A (Taildragger) and NC5B (Tricycle)
Price: $963 each
Eligible On: All Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 6.6 lbs.
Material: Stainless Steel
Purpose: Allows for pre-heating of aircraft engine in cold weather.
Installation: None required.
Misc. Information:
NC5A dimensions are 6" x 17.25"
NC5B dimensions are 6" x 15"
Fuel options include 100LL Aviation Gas, Leaded or Unleaded Auto Gas, White Gas, Kerosene, Diesel, or JP4 and JP8 jet fuel
...
More
Piper Gust Locks
P/N: AD18-GL
Price: $121 per pair
Eligible On: All Piper Aircraft equipped with fabric wings
STC: N/A
FAA/PMA: N/A
Weight: 1 lb. per pair
Material: 6061 T6 Aluminum, powder coated red.
Purpose: Prevents control surface damage from wind when aircraft is parked on the ground.
Installation: Installs outside of aircraft using bungee cord and tie down ring.
Misc. Information: External locks prevent wear to cables and pulleys better than internal gust lock options....
More
Aviat Husky Main Landing Gear
P/N: AD45017-501HD (left hand) and AD45017-502HD (right hand)
Price: $1,900.25 per side
Eligible On: Husky A-1, A-1A, A-1B, and A-1C Series Aircraft
STC: N/A
FAA/PMA: Supplement 26
Material: 4130N
Purpose: Approved replacement for Aviat P/N's 35017-505 and 35017-506.
Installation: Same as original stock parts.
Misc. Information: Landing gear can be powder coated white, black, or gray for an additional $85 per side.
More
Maule Mufflers
P/N: AD5266 (LH) and AD5267 (RH)
Price: $973.25 each
Eligible On: Maule M5-235C, M6-235, M7-235, M7-235A, M7-235B, M7-235C, MX7-7-235, and M8-235 Series Aircraft
STC: N/A
FAA/PMA: Supplement 22 (covers AD5266) Supplement 22 (covers AD5267)
Weight: 7 lbs.
Material: 321 Stainless Steel
Purpose: Direct replacement for Maule P/N's 5266 and 5267.
Installation: Same as original stock part.
Misc. Information: Includes center stack, does not include shroud.
&n...
More
EDO 89-2000 Water Rudder Pickup Handle
P/N: 3359-2-KIT
Price: $90.25 each
Eligible On: All aircraft equipped with EDO 89-2000 floats
STC: N/A
FAA/PMA: Approved
Weight: 3.2 oz.
Material: 304 Stainless Steel
Purpose: Direct replacement for EDO P/N 0367-1.
Installation: Please see Installation Instructions.
Misc. Information: Handle P/N 3359-2 and Catch P/N 3359-3 included with purchase.
More
C205/206 Ski Attach Kit
P/N: 3168-206
Price: $401.75 per kit
Eligible On: All Cessna 205 and 206 Series Aircraft
STC: N/A
FAA/PMA: N/A
Material: 304 SS Brackets
Purpose: Used for ski rigging installation.
Installation: Brackets are bolted on.
Misc. Information: Custom order only. Commonly used for straight wheel ski replacement installations under FAA field approval.
More
Cessna Wisco Filler Neck Adapter
P/N: 3189
Price: $273 without cap, or Current Market Price with cap.
Eligible On: Cessna 180, 182, 185, 188, and 206 Series Aircraft
STC: SA3632NM (covers 180), SA3636NM (covers 182), SA3639NM (covers 185), SA3640NM (covers 188), and SA3637NM (covers 206)
FAA/PMA: Supplement 1 (covers 182, 185, and 188), Supplement 1 (covers 206)
Weight: 7.6 oz. without cap, 11 oz. with cap
Material: Aluminum and Stainless Steel
Purpose: Filler neck adapter replaces flush fuel caps...
More
C207 Heavy Duty Tailpipe Clamp
P/N: AD1250259-1
Price: $376 each
Eligible On: Cessna 207 and T207
STC: N/A
FAA/PMA: Supplement 22
Weight: 5 oz.
Material: 321 Stainless Steel
Purpose: Direct replacement for Cessna P/N 1250259-1
Installation: Same as original stock part.
Misc. Information: Replacement clamp is made of heavy duty material, including extra doublers, to prevent damage to attach mounts.
More
C206 Seaplane Exhaust Deflectors
P/N: 3238
Price: $685 per pair
Eligible On: Cessna 206, U206, U206A, P206, P206B, P206C, P206D, P206E, U206B, U206C, U206D, U206E, U206F, and U206G Series Aircraft equipped with Seaplane Tailpipes
STC: SA02041AK
FAA/PMA: Supplement 1
Weight: 1.9 lbs. per pair
Material: 321 Stainless Steel
Purpose: Deflects exhaust away from aircraft.
Installation: Please see Installation Instructions.
Misc. Information: Aircraft must be equipped with Cessna Seaplane Tailpipe ...
More
C205/206/207/210 Heavy Duty Mufflers
P/N: AD1250250-5 (left hand) and AD1250251-16 (right hand)
Price: $602.50 each (left hand) or $401.75 each (right hand)
Eligible On: Cessna 205, 206F, 206G, 207, 207A, 210M
STC: N/A
FAA/PMA: Supplement 21 (covers left hand), Supplement 19 (covers right hand)
Weight: 5 lbs., 2.2 oz. (left hand) and 2 lbs., 12.8 oz. (right hand)
Material: 321 Stainless Steel
Purpose: Heavy duty replacements for Cessna P/N's 1250250-5 and 1250251-16.
Installation: Same as original ...
More
C180/182/185 Heavy Duty Muffler Shroud
P/N: 4236
Price: $479 each
Eligible On: Cessna 180, 182P, 182R (S/N 18262466-18268541), F182P, F182Q (S/N 18200001- 18200169) and 185 Series Aircraft
STC: N/A
FAA/PMA: Supplement 4
Weight: 3.7 lbs.
Material: 304 Stainless Steel
Purpose: Heavy duty direct replacement for Cessna P/N 0750161-87.
Installation: Same as stock Cessna part.
Misc. Information: Fabricated with a doubler over the tailpipe outlet.
More
C180/182/185 Heavy Duty Seaplane Muffler
P/N: AD0750161-89
Price: $705.50 each
Eligible On: Cessna 180G, 180H, 180J, 180K, 182G, 182H, 182J, 182K, 182L, 182M, 182N, 182P, 182Q, 182R 185, 185A, 185B, 185C, 185D, 185E, A185E, and A185F Series Aircraft
STC: N/A
FAA/PMA: Supplement 20
Material: 321 Stainless Steel
Purpose: Heavy duty direct replacement for Cessna P/N 0750161-89
Installation: Same as original stock part.
More
Piper Cargo Tie Down Bases
P/N: 40000-11
Price: $15.50 each
Eligible On: J3, PA-12, PA-14, and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 1 oz.
Material: 7075-T6511 Aluminum
Purpose: Receptacle for Cargo Tie Down Rings P/N 40340-20 .
Installation: Please see AC 43.13-2B, Chapter 12 for installation practices. Highly recommended to install with MS24694 structural screws using doublers behind the mounting surface.
Misc. Information: Load rating of 2000 lbs. Used with Cargo Net P...
More
Piper Cargo Tie Down Rings
P/N: 40340-20
Price: $15.50 each
Eligible On: J3, PA-12, PA-14, and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 2.5 oz.
Material: Steel
Purpose: Direct replacement for Piper P/N 07110069-1, 07110069-2, 07110069-5, and 07110069-6. Used with Piper Cargo Tie Down Bases P/N 40000-11.
Installation: Please see AC 43.13-2B, Chapter 12 for installation practices.
Misc. Information: Load rating of 4,000 lbs. for vertical loads, 2,000 lbs. for horizontal loads,...
More
Cessna Cabin Step (Early Models)
P/N: 8013-01
Price: $334.75 each
Eligible On: Cessna 170 thru 170B, 180 thru 180F, and 185 thru 185E Series Aircraft
STC: N/A
FAA/PMA: Supplement 7 (covers C170 thru C170B) Supplement 7 (covers C180 thru C180F and C185 thru C185E)
Weight: 1 lb.
Material: 4130N Stainless Steel, powder coated white
Purpose: Heavy duty replacement.
Installation: Same as stock cabin step.
Misc. Information: Step is universal and can be used on left or right side. Fabricated from ...
More
Cessna Step for Boot Cowl
P/N: 3354S
Price: $87.50 each
Eligible On: Cessna U206, U206A, U206B, U206C, U206D, U206E, U206F, U206G, TU206A, TU206B, TU206C, TU206D, TU206E, TU206F, TU206G, P206, and TP206A Series Aircraft
STC: N/A
FAA/PMA: Supplement 30
Weight: 7.3 oz.
Material: 2024-T3, powder coated white.
Purpose: Direct replacement for Cessna P/N 1242022-5.
Installation: Please see Cessna Accessory Kit Information and Installation Instructions (AK172-168J).
Misc. Information: This h...
More
Cessna Handle for Boot Cowl
P/N: 3354H
Price: $87.50 each
Eligible On: Cessna 180H, 180J, A185E, A185F, U206, U206A, U206B, U206C, U206D, U206E, U206F, U206G, TU206A, TU206B, TU206C, TU206D, TU206E, TU206F, TU206G, P206, and TP206A Series Aircraft
STC: N/A
FAA/PMA: Supplement 30
Weight: 4.6 oz.
Material: Stainless Steel
Purpose: Heavy duty replacement for Cessna P/N's 1242022-5 and 0713191-1.
Installation: Please see Cessna Accessory Kit Information and Installation Instructions (AK172-168...
More
Shaw Filler Neck Adapter
P/N: 3188
Price: $273 without cap, or Current Market Price with cap
Eligible On: Cessna 180, 182, 185, 188, 206, 207, and 210 Series Aircraft
STC: SA2325NM (covers 180), SA2326NM (covers 182), SA2327NM (covers 185), SA2328NM (covers 188), SA2329NM (covers 206), SA2330NM (covers 207), and SA2331NM (covers 210)
FAA/PMA: Approved
Weight: 5 oz. without cap, 8.4 oz. with cap
Material: Aluminum and Stainless Steel
Purpose: Filler neck adapter replaces flush fuel caps wit...
More
Cessna Heat Shield for Intake Hose
P/N: 3274
Price: $27.50 each
Eligible On: Cessna 180, 185, 206, 207, and 210 Series Aircraft
STC: N/A
FAA/PMA: Supplement 1
Material: Stainless Steel
Purpose: Approved replacement for Cessna P/N 0750143-1. Protects engine intake hoses from heat damage.
Installation: Same as original Cessna stock part.
Misc. Information: Fabricated from heavy duty stainless steel to prevent cracking.
More
Cessna Heat Shields for Engine Mount
P/N: 3274-8 (8 inches in length), 3274-10 (10 inches in length), and 3274-12 (12 inches in length)
Price: $38.75 each
Eligible On: Cessna 180 and 185 Series Aircraft
STC: N/A
FAA/PMA: N/A
Material: Stainless Steel
Purpose: Prevents heat damage to the engine mount.
Installation: Installs with hose clamps.
More
Cessna Battery Rack for Firewall
P/N: 8008
Price: $440.25 each
Eligible On: Cessna 170, 170A, 170B, 180, 180A, 180B, 180C, 180D, 180E, 180F, 180G, 180H, 180J, 180K, 182, 182A, 182B, 182C, 182D, 182E, 182F, 182G, 182H, 185, 185A, 185B, 185C, 185D, 185E, A185E, and A185F Series Aircraft
STC: SA02333AK-D
FAA/PMA: Supplement 8, Rev 1
Weight: 3 lb's with out battery, 13 lb's with approved battery
Material: Stainless Steel
Purpose: Modification to reduce weight.
Installation: Please see Installation ...
More
C208 Seat Track Tie Downs
P/N: TDC-208
Price: $90.25 each
Eligible On: Cessna 208, 208A, and 208B Series Aircraft
STC: SA02359AK-D
FAA/PMA: Supplement 25
Weight: 4 oz.
Material: Aluminum, anodized green with steel bolt.
Purpose: Allows cargo tie down capability using existing seat tracks.
Installation: Please see Installation Instructions.
More
Water Rudder Pickup Tube
PA-31 Seat Track Tiedowns
P/N: TDP-31
Price: $90.25 each
Eligible On: Piper PA31, PA31-300, PA31-325, PA31-350, PA31P-350, PA31P, PA31T, PA31T1, PA31T2, and PA31T3 Series Aircraft
STC: SA02359AK-D
FAA/PMA: Supplement 25
Weight: 4 oz.
Material: Aluminum, anodized blue with steel bolt.
Purpose: Allows cargo tie down capability using existing seat tracks.
Installation: Please see Installation Instructions.
More
PA-18/PA-19 Safari Seat
P/N: 6151
Price: $710.75 each
Eligible On: Piper PA-18 and PA-19 Series Aircraft
STC: SA02356AK-D
FAA/PMA: Approved
Weight: 6.4 lbs.
Material: 4130 N Steel, powder coated black
Purpose: Lightweight replacement of stock Piper seat.
Installation: Please see Installation Instructions.
Misc. Information: Our Safari Seat is approximately 14 lbs. lighter than the stock Piper seat. The seat bottom is 13.5" wide and the seat back is 11.5" wide. Seat back folds forwar...
More
PA-18 Folding Front Seat
P/N: 3186-1A
Price: $1,838.50 each
Eligible On: PA-18 and PA-19 Series Aircraft
STC: SA02085AK
FAA/PMA: Supplement 1
Material: 4130 N
Purpose: Allows pilot seat to fold forward for easier loading of aircraft.
Installation: Bolt in replacement for standard seat.
Misc. Information: Seats are not upholstered. Contact Univair for upholstery kit information. Univair
More
PA-18/PA-22 Winter Front
P/N: WINTER FRONT
Price: $67 each
Eligible On: Piper PA-18 and PA-22 Series Aircraft equipped with front mounted oil cooler.
STC: N/A
FAA/PMA: N/A
Weight: 2.6 oz.
Material: Aluminum, powder coated white, black, or red.
Purpose: Replacement for Piper P/N's 14073-00, 101-427, and 14793-000. Blocks air flow to the oil cooler to help maintain proper oil temperature.
Installation: Snaps in place.
Misc. Information: Remove in temperatures above 40 degrees Fahrenhei...
More
B&C Oil Cooler Mount – Right Hand
P/N: 6003
Price: $170 each
Eligible On: PA-18 and PA-19 Series Aircraft
STC: SA02358AK-D
FAA/PMA: Supplement 15
Weight: 6 oz.
Material: 4130N
Purpose: To install B&C Alternator under STC SA0134WI and SE00939WI.
Installation: Please see Installation Instructions.
Misc. Information: Requires P/N 6020 for installation. Fits wide deck only.
More
PA-18 Titanium Firewall
P/N:
8007-02
NAME:
Titanium Firewall
PRICE:
$664.25
ELIGIBLE ON:
PA-18 Series Aircraft
STC's:
No
FAA-PMA'd:
Yes
WEIGHT:
2 Lbs. 6 Oz.
MATERIAL:
Titanium
PURPOSE:
Weight savings modification
INSTALLATION:
Same as stock Piper firewall
MISC INFO:
- When ordering our facility can eliminate holes as per customer request
- PA-12 FIREWALLS: Custom made as per customer request, not FAA-PMA'd
- Direct replacement for P/N: 12365-003...
More
PA-18 Stainless Steel Firewall
P/N:
8007-01
NAME:
Stainless Steel Firewall
PRICE:
$479.00
ELIGIBLE ON:
PA-18 Series aircraft
STC's:
No
FAA-PMA'd:
Yes
WEIGHT:
4 Lbs. 10 OZ.
MATERIAL:
Stainless Steel
PURPOSE:
- Clean smooth stainless steel finish will not corrode out
like original galvanized Piper firewalls.
INSTALLATION:
Same as stock Piper firewall.
MISC INFO:
- When ordering our facility can eliminate hole as per customer request.
- PA-12 FIREWALLS: Cus...
More
B&C Alternator Mounting Bracket
P/N: 6020
Price: $252.25 each
Eligible On: PA-18 and PA-19 Series Aircraft
STC: SA02358AK-D
FAA/PMA: Supplement 15
Material: 4130N
Purpose: Allows oil cooler to mount with B&C alternator and/or starter installed.
Installation: Please see Installation Instructions.
Misc. Information:
Fits wide deck engines only.
Works with P/N 6003 and P/N 6018.
Please reference B&C STC's SA0134WI and SE00939WI.
B&C Starter only requires P/N 6018.
B&a...
More
B&C Oil Cooler Mount – Left Hand
P/N: 6018
Price: $396.50 each
Eligible On: PA-18 and PA-19 Series Aircraft
STC: SA02358AK-D
FAA/PMA: Supplement 15
Weight: 9.4 oz.
Material: 4130N
Purpose: To install B&C Alternator under STC SA0134WI and SE00939WI.
Installation: Please see Installation Instructions.
Misc. Information: Requires P/N 6020 for installation. Fits wide deck only.
More
PA-18-150 Engine Mount
P/N: U12351-015
Price: $870.25 each
Eligible On: PA-18-150 Series Aircraft
STC: N/A
FAA/PMA: Yes (Univair holds PMA approval)
Weight: Same as original.
Material: 4130N Steel, powder coated gloss black.
Purpose: To secure the power plant to the firewall.
Installation: Same as Piper stock installation.
Misc. Information: Ground strap installed. Custom colors available upon request.
More
PA-12 and PA-14 Hot Rod Muffler
P/N: AD10308-HR
Price: $1,673.75 each
Eligible On: Piper PA-12 and PA-14 Series Aircraft equipped with Lycoming Engines
STC: SA02388AK
FAA/PMA: Approved
Material: Stainless Steel
Purpose: Coreless muffler produces more horsepower than standard muffler.
Installation: Installation instructions included with purchase. Otherwise, installation instructions can be requested from STC owner Butch Cavanaugh at (907) 376-7070.
Misc. Information: Includes tailpipe, tailpip...
More
Belly Pan Clean Out Kit
P/N: 3285-2
Price: $396.50 each
Eligible On: PA-18 and PA-19 Series Aircraft
STC: N/A
FAA/PMA: Supplement 1
Weight: 1.8 lbs.
Material: 2024 T3 aluminum pan; mild steel receptacle plates.
Purpose: To allow clean out of aft lower fuselage section and to gain access to jack screw and pulleys.
Installation: Welding is required for lion fastener receptacle plates.
More
Piper Bungee Covers
P/N: BUNGEE COVER
Price: $69.50 per pair
Eligible On: J3, J5, PA-11, and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Material: Naugahyde
Purpose: Replacement for P/N 10566-000 and 10566-005. Helps keep bungees clean and allows for easier inspection.
Installation: Covers snap on over bungees.
More
PA-12 Lift Strut Reinforcment Bracket
P/N: 3192-12
Price: $121 each
Eligible On: PA-12, PA-12S and PA-14 Series Aircraft
STC: SA02021AK
FAA/PMA: Supplement 9
Weight: 4 oz.
Material: 4130N Steel
Purpose: Provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors.
Installation: Please see Installation Instructions.
Misc. Information: Powder coated white. If lift strut fitting is bent or has elongated holes it will nee...
More
Piper Lifting Eyes
P/N: 3217
Price: $79.75 per pair
Eligible On: Piper PA-12 thru PA-22 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 3 oz.
Material: 304 Stainless Steel
Purpose: Allows aircraft to be hoisted for float, ski, wheel, and tire installations.
Installation: Please see Installation Instructions.
Misc. Information: This part will not work for J3 or PA-11 aircraft.
More
Piper Aircraft Tie Down Bracket
P/N: 3197
Price: $126.25 each, normally sold in pairs.
Eligible On: PA-12 and PA-18 Series Aircraft
STC: PA-12 SA02067AK ; PA-18 SA02066AK
FAA/PMA: Supplement 16
Weight: 15 oz. each
Material: Stainless steel with aluminum spacers.
Purpose: To remove the tie down load from the front lift strut U-channel that is attached to the front spar.
Installation: Recommended at the time of wing covering.
More
Piper Long Step
P/N: 3195
Price: $190.50 each
Eligible On: Piper J3 thru PA-19 Series Aircraft
STC: SA02007AK
FAA/PMA: Supplement 7
Weight: 3 lbs.
Material: 6061-T6 Aluminum, powder coated white or black
Purpose: Assists with refueling, entering, and exiting aircraft.
Installation: Please see Installation Instructions.
Misc. Information: Before placing your order please measure the outside diameter of your FWD and AFT main landing gear tubes to ensure proper clamp sizes are ...
More
Hydraulic Reservoir Tank
P/N: 2080-S1, 2080-M1, and 2080-L1
Price: $293.50 each
Eligible On: Aircraft equipped with hydraulic ski's
STC: N/A
FAA/PMA: N/A
Weight: 2080-S1 is 8.9 oz., 2080-M1 is 10.5 oz., and 2080-L1 is 11.7 oz.
Material: 6061-T6 Aluminum, powder coated yellow
Purpose: Provides hydraulic reservoir needed for hydraulic wheel ski installations.
Installation: Bolts on with supplied strap.
Misc. Information: 3 sizes available. 2080-S1 has a length of approximately 3.5 inch...
More
Gold Ski Springs
P/N: 2127
Price: $170 each
Eligible On: Approved Model List
STC: SA4624NM
FAA/PMA: Supplement 1
Weight: 2.2 lbs.
Material: Cadmium Plated Steel
Purpose: Improves ski rigging tension in cold weather.
Installation: Installation instructions included with STC.
Misc. Information:
For ski equipped airplanes that have rigid welded tubular steel type main landing gear
VNE equal to 160 MPH or less
Maximum weight 2500 lbs.
19" long, 1 3/16" diameter
More
C206/207 Seat Back Frame
P/N: 3226
Price: $499.50 each
Eligible On: Cessna 206 and 207 Series Aircraft
STC: N/A
FAA/PMA: Supplement 1
Weight: 3 lbs., 7 oz.
Material: 6061-T6 Aluminum, powder coated gray
Purpose: Direct replacement for Cessna P/N's 1214012-1 and 1214012-4.
Installation: Same as stock Cessna part.
Misc. Information: Seat back and hinges fabricated from solid stock aluminum for durability and to prevent bending and cracking at the hinge mounts.
More
PA-18 Preheat Shroud
P/N: 3182
Price: $252.25 each
Eligible On: PA-18 Series Aircraft
STC: SA02025AK
FAA/PMA: Supplement 8
Weight: 12.5 oz.
Material: 5052 Aluminum and 6061 T6 Aluminum
Purpose: Approved replacement for P/N 14239-00.
Installation: Same as stock shroud installation requirements.
Misc. Info: Two piece split design allows for easier removal during inspections. Thicker aluminum lasts much longer than OEM parts.
More
PA-18-150 Muffler Shroud with 2 Piece Split
P/N: 3236
Price: $448 each
Eligible On: Piper PA-18-150 Series Aircraft
STC: SA02024AK
FAA/PMA: Supplement 8
Weight: 1.9 lbs.
Material: 5052-H32 and 6061-T6 Aluminum
Purpose: Direct replacement for Piper P/N's 12436-10 and 71261-08
Installation: Please see Installation Instructions.
Misc. Information: Shroud is split into 2 pieces for easier installation and removal.
More
PA-18 Heavy Duty Muffler
P/N: 3241
Price: $911.50 each
Eligible On: Piper PA-18 Series Aircraft
STC: SA02023AK
FAA/PMA: Supplement 8
Weight: 6.2 lbs.
Material: 321 Stainless Steel
Purpose: Heavy duty direct replacement for Piper P/N 12433-14
Installation: Please see Installation Instructions.
More
PA-18 Hot Rod Muffler
P/N: 3241-HR
Price: $1,581 each
Eligible On: PA-18 and PA-19 Series Aircraft
STC: SA02273AK
FAA/PMA: Approved
Weight: 7 lbs., 4 oz.
Material: Stainless Steel
Purpose: Direct replacement for Piper P/N 12433-14.
Installation: Installation instructions included with purchase. Otherwise, installation instructions can be requested from STC owner Butch Cavanaugh at (907) 376-7070.
Misc. Information: Includes 2 piece muffler shroud, 1 tailpipe support rod, and 1 tai...
More
Cessna Seat Track Tie Downs
P/N: 8006
Price: $69.50 each
Eligible On: Cessna 150, 150A, 150B, 150C, 150D, 150E, 150F, 150G, 150H, 150J, 150K, A150K, A150L, 150M, A150M, FA150K, FA150L, FRA150L, FRA150M, 152, A152, FA152, F152, 170, 170A, 170B, 172, 172A, 172B, 172C, 172D, 172E, 172F (USAF T-41A), 172G, 172H, 172I, 172K, 172L, 172M, 172N, 172P, 172Q, 172R, 172S, F172D, F172E, F172F, F172G, F172H, F172K, F172L, F172M, F172N, F172P, 175, 175A, 175B, 175C, P172D, R172F(USAF T-41D), R172G, R172H, R172J, R172K, 1...
More
Cessna Removable Folding Jump Seats
P/N: 3187-L (left hand) and 3187-R (right hand)
Price: $1,545 each or $3,038.50 per pair (C182E thru C182R are $1,699.50 each and $3,347.50 per pair)
Eligible On: Please see FAA Approved Model List (AML).
STC: SA02008AK
FAA/PMA: Supplement 1
Weight: 6.8 lbs.
Material: 4130N, powder coated gray.
Purpose: Our jump seats replace the standard bench seat and offer a weight savings of approximately 14 lbs. The seats can easily be folded or removed for loading and unload...
More
PA-18-150 30.5 Gallon Fuel Tank
P/N: 3140-L (left hand) and 3140-R (right hand)
Price: $3,218.75 each side
Eligible On: Piper PA-18-150, PA-18A-150, PA-18S-150, and PA-18AS-150
STC: SA649AL
FAA/PMA: Supplement 1
Weight: 12 lbs. per pair, empty
Material: Aluminum
Purpose: Allows up to 61 gallons of fuel capacity.
Installation: Please see Installation Instructions.
Misc. Information: May install left hand or right hand tanks only while retaining standard 18 gallon tanks. Fuel system sight gau...
More
PA-18 Rear Header Tank
P/N: 3169-2
Price: $365.75 each
Eligible On: Piper PA-18 Series Aircraft
STC: SA2303NM
FAA/PMA: Supplement 1
Weight: 13 oz.
Material: Aluminum
Purpose: Direct replacement for Piper P/N 14211-00.
Installation: Same as stock Piper part.
Misc. Information: Heavy duty light weight design is approximately 9 oz. lighter than stock Piper part.
More
PA-18 Front Header Tank
P/N: 3169-1A
Price: $365.75 each
Eligible On: Piper PA-18 Series Aircraft
STC: SA2303NM
FAA/PMA: Supplement 1
Weight: 12.5 oz.
Material: Aluminum
Purpose: Direct replacement for Piper P/N 10725-00.
Installation: Same as stock Piper part.
Misc. Information: Heavy duty light weight design is approximately 9 oz. lighter than stock Piper part.
More
Piper Filler Neck Repair Kit
P/N: 3140-60R
Price: $170 each
Eligible On: Piper Aluminum Welded Fuel Tanks
STC: N/A
FAA/PMA: N/A
Weight: .4 lbs.
Material: Stainless Steel
Purpose: Allows filler neck to be repaired in the field with out welding.
Installation: Install with fuel tank sealant and CherryMAX rivets.
Misc. Information: Fuel tank sealant not included.
More
Piper Vented Fuel Cap
P/N: 3267
Price: $78.75 each
Eligible On: Piper PA-11, PA-11S, PA-12, PA-12S, PA-14, PA-18, PA-20, and PA-22 Series Aircraft
STC: SA02040AK
FAA/PMA: Supplement 11
Weight: 3 oz.
Material: Stainless steel with high quality gasket
Purpose: Approved replacement for Piper P/N's 10188-00, 454009, and 454039.
Installation: Same as stock Piper caps.
Misc. Information: Supplied with blue gasket (P/N 3267-4) for Avgas. Use black gasket (P/N 3267-3) for Autogas. Gaskets...
More
Piper Vented Fuel Cap for 180HP
P/N: 3267-180
Price: $90.25 each
Eligible On: Piper PA-12, PA-14, and PA-18 Series Aircraft with 180HP engines.
STC: N/A
FAA/PMA: N/A
Weight: 3 oz.
Material: Stainless Steel
Purpose: Designed to comply with most fuel cap STC's for Piper aircraft equipped with 180HP engines.
Installation: Same as stock Piper caps. Vent tube must face forward on aircraft when installed.
Misc. Information: Also known as a "snorkel" style vented fuel cap. Supplied with blue gaske...
More
Fuel System Sight Gauge
P/N: 3286-1
Price: $69.50 each, normally sold in pairs.
Eligible On: PA-12, PA-14, PA-18, and PA-22 Series Aircraft using F. A. Dodge 30.5 gallon fuel tanks only.
STC: SA02115AK
FAA/PMA: Supplement 1
Weight: 2 oz.
Material: Tygothane tubing with aluminum restrictors
Purpose: Eliminates need for electrical fuel gauge.
Installation: Please see Installation and Calibration Procedures.
Misc. Information: Tygothane tubes made for use with Avgas. If you use Autogas...
More
Axle Adapter Kit
P/N: 2079
Price: $190.50 per kit, each kit contains 1 pair.
Eligible On: Piper Aircraft using 1 1/4" axles
STC: N/A
FAA/PMA: N/A
Weight: 1.1 lbs per kit
Material: 4130N with stainless steel washers
Purpose: To convert 1 1/4" axles to 1 1/2" axles.
Installation: Click here to view Installation Instructions. No special tools or welding are required. Due to differences in PMA landing gear manufacturers the bearing stops may need to be shortened to fit.
Misc. In...
More
Piper Main Landing Gear Safety Cables – Standard Length
P/N: 2089-12 (PA-12 and PA-14) or 2089-18 (J3, PA-11, PA-18, and PA-19)
Price: $198.25 per kit
Eligible On: J3, PA-11, PA-12, PA-14, PA-18, and PA-19 Series Aircraft
STC: SA4609NM (covers J3 and PA-11), SA4607NM (covers PA-12), SA505AL (covers PA-14), and SA4606NM (covers PA-18 and PA-19)
FAA/PMA: Please click this link to view all approvals.
Weight: 2.9 lbs.
Material: Stainless steel plates and galvanized cables.
Purpose: Prevents main landing gear from collapsing...
More
Piper Shock Struts – Standard Length
P/N: 3164-1 (PA-18) and 3164-2 (PA-12 and PA-14)
Price: $123.50 each
Eligible On: Piper PA-12, PA-14, and PA-18 Series Aircraft
STC: SA4619NM (covers PA-12), SA4620NM (covers PA-14), SA4621NM (covers PA-18)
FAA/PMA: Supplement 1 (covers PA-18), Supplement 1 (covers PA-12 and PA-14)
Weight: 1 lb., 2 oz.
Material: 4130N, powder coated white, black, or gray.
Purpose: 3164-1 is a heavy duty replacement for Piper P/N 12844-04.
Installation: Same as original stock par...
More
PA-18 Cabane Vee
P/N: 3166-1
Price: $293.50 each
Eligible On: PA-18 Series Aircraft
STC: SA4618NM
FAA/PMA: Supplement 1
Weight: 2 lbs.
Material: 4130N
Purpose: Heavy duty replacement for Piper P/N 30602-010 and 30602-007.
Installation: Same as stock installation, please reference Piper Owners Manual.
More
Piper Main Landing Gear – 3″ Extended Length with 1 1/4 Axle
P/N: 3284-1 (left hand) and 3284-2 (right hand)
Price: $530.50 per side
Eligible On: PA-12, PA-14, PA-18 and PA-19 Series Aircraft
STC: SA02188AK (covers PA-12 and PA-14) SA02152AK (covers PA-18 and PA-19)
FAA/PMA: Supplement 25
Weight: 8.7 lbs. per side
Material: 4130 N Steel Tubing (1 1/2" OD forward tube, 1 3/8" OD rear tube)
Purpose: Heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for tak...
More
Piper Main Landing Gear – 3″ Extended Length with 1 1/2 Axle
P/N: 3284-1A (left hand) and 3284-2A (right hand)
Price: $530.50 per side
Eligible On: Piper PA-12, PA-14, PA-18, and PA-19 Series Aircraft
STC: SA02188AK (covers PA-12 and PA-14) SA02152AK (covers PA-18 and PA-19)
FAA/PMA: Supplement 25
Weight: 8.7 lbs. per side
Material: 4130N Steel Tubing (1 1/2" OD forward tube, 1 3/8" OD rear tube)
Purpose: Heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski's. Also allows...
More
Piper Tail Brace Beef Up
P/N: 1022-12 (PA-12) and 1022-18 (PA-18)
Price: $190.50 each
Eligible On: Piper PA-18 and PA-12 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 12 oz.
Material: 4130N steel tubing, powder coated gray.
Purpose: Used to strengthen the AFT tail section to prevent twisting.
Installation: Can be welded or clamped on when fabric is removed from wings.
Misc. Information: Log book entry only, minor alteration.
More
PA-18 Weld On Aft Float Fittings
P/N: 3143-1
Price: $499.50 per pair
Eligible On: J3, PA-11, PA-18, and PA-19 Aircraft Series
STC: SA4615NM
FAA/PMA: Supplement 1
Weight: 2 lbs. per pair
Material: 4130N Steel
Purpose: Replaces clamp on style fittings. Provides cleaner and stronger installation.
Installation: Normally accomplished at the time of re-build, however, the fabric can be removed to accommodate installation at other times.
Misc. Information: Part includes swivel block for strut and swivel ...
More
Strobe Light Mounting Bracket
P/N: 2087
Price: $293.50 each
Eligible On: PA-18
STC: SA638AL
FAA/PMA: Supplement 1
Weight: 7.6 oz
Material: Fiberglass and Aluminum
Purpose: Allows installation of a rudder mounted anti-collision light or strobe light.
Installation: Instructions included with STC paperwork
Misc. Info: Compatibility with Whelen A470 and Grimes 30-0465-5 strobe lights has been determined.
More
Piper Vertical Fin
P/N: U40592-000
Price: $278 each
Eligible On: Piper J3C-40, J3C-50, J3C-50S, J3C-65, J3C-65S, J3F-50, J3F-50S, J3F-60, J3F-60S, J3F-65, J3F-65S, J3L, J3L-S, J3L-65, J3L-65S (S/N 4133 & on), J4, J4A, J4A-S (S/N 4-1368 & on Except 4-1378), J5A, J5A-80, J5B, J5C, PA-11, PA-11S, PA-12, PA-12S, PA-14, PA-18, PA-18S, PA-18-105, PA-18S-105, PA-18-125, PA-18S-125, PA-18AS-125, PA-18-135, PA-18S-135, PA-18A-135, PA-18AS-135, PA-18-150, PA-18S-150, PA-18A-150, and PA-18AS-150 Serie...
More
PA-18 Standard Horizontal Stabilizer
P/N: U12769-000
Price: $427.50 each
Eligible On: Piper PA-18
STC: N/A
FAA/PMA: Supplement 3
Material: 4130N Tube, powder coated gray
Purpose: Prevents up-and-down, or pitching, motion of the aircraft nose.
Installation: Same as original stock part.
Misc. Information: Requires fabric installation.
More
Clamp On Headset Hanger Bracket
P/N:
AD-18-HSH
NAME:
Clamp on headset hanger bracket
PRICE:
$28.50 / Each
ELIGIBLE ON:
PA-18 Aircraft
STC's:
N/A
FAA-PMA'd:
N/A
WEIGHT:
2 Oz
MATERIAL:
- Steel
- Powder coated flat black
PURPOSE:
-To hang up headsets in cockpit
INSTALLATION:
- This will clamp on the top deck X-brace.
- Clamp is for 7/8'' Dia tube.
- When installing hanger post must be facing away from pilot or passanger
MISC INFO:
- Custom fabrication of ...
More
PA-11/PA-18 Pilot Seat Belt Weld-on Attach Kit
P/N: 3246
Price: $345 each
Eligible On: PA-11 and PA-18 Aircraft Series
STC: SA02043AK
FAA/PMA: Supplement 1
Weight: 12 oz.
Material: 4130 N
Purpose: Relocates pilots seat belt attachment to the fuselage floor for improved safety.
Installation: Please see Installation Drawing. Welding is required. Fabric and floorboard is removed prior to installation.
More
Blank Instrument Panel
P/N: 1034-B
Price: $177.75 each
Eligible On: PA-18 and PA-19 Series Aircraft
STC: N/A
FAA/PMA: N/A
Material: 2024 T3 Aluminum
Purpose: Allows for custom panel layouts.
Installation: Same as standard panel.
Misc. Information: Fabricated extra long to allow for a taller panel if desired.
More
PA-18 Standard Rudder
P/N: U15726-002
Price: $427.50 each
Eligible On: Piper PA-18 Series Aircraft
STC: N/A
FAA/PMA: Supplement 3
Weight: 3 lbs., 15 oz.
Material: 4130N, powder coated gray.
Purpose: Direct replacement for Piper P/N 15726-002.
Installation: Same as original stock part.
Misc. Information: Sold with bushings installed. Also available with no light housing. Please request this when placing your order.
More
PA-18 Standard Elevator
P/N: U12270-000
Price: $437.75 each
Eligible On: PA-18 Series Aircraft
STC: N/A
FAA/PMA: Supplement 3
Material: 4130N Tube, powder coated gray.
Purpose: Direct replacement for Piper P/N 12770-000.
Installation: Same as stock Piper installation.
More
PA-18 Lower Cowl Channel
P/N: 3277 (Stainless Steel) or 3277T (Titanium)
Price: $91.25 each for stainless steel, $126.25 each for titanium
Eligible On: PA-18 Series Aircraft
STC: N/A
FAA/PMA: Supplement 58 (covers stainless steel only, titanium not FAA/PMA approved)
Weight: 9 oz. for stainless steel, 5.5 oz. for titanium
Material: Stainless steel or Titanium
Purpose: Direct replacement for Piper P/N 12364-03.
Installation: Same as stock part. Please see Piper Owners Manual.
Misc. Inf...
More
PA-18 Upper Cowl Channel
P/N: 3276 (Stainless Steel) or 3276T (Titanium)
Price: $91.25 each for stainless steel, $126.25 each for titanium
Eligible On: PA-18 Series Aircraft
STC: N/A
FAA/PMA: Supplement 58 (covers stainless steel only, titanium not FAA/PMA approved)
Weight: 8 oz. for stainless steel, 4.5 oz. for titanium
Material: Stainless Steel or Titanium
Purpose: Direct replacement for Piper P/N 12362-03.
Installation: Same as stock part. Please see Piper Owner Manual.
Misc. Info...
More
PA-18-150 Carburetor Air Filter Dome
P/N: 3281
Price: $131.25 each
Eligible On: PA-18-150
STC: N/A
FAA/PMA: Supplement 14
Weight: 5 oz.
Material: Aluminum
Purpose: Heavy duty replacement for Piper P/N 15007-00
Installation: Same as original installation. Please see Piper Owners Manual.
Misc. Information: Powder coated white or black. Stainless steel washer added to prevent wear and tear.
More
PA-18 Stainless Steel Boot Cowl Assembly
P/N: 18-BC
Price: $1,735.50 each
Eligible On: PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 11 lbs.
Material: Stainless Steel
Misc. Information: F. Atlee Dodge boot cowls are fabricated using our FAA/PMA approved firewall. We incorporate reinforcements at the cowl channel attach points to prevent cracking. Cowl channel kit is installed. Side to top seams are left un-riveted to allow for adjustable fit to fuselage.
More
PA-18 Pilot’s Seat Bottom Access Panel
P/N: 3186-SBL
Price: $85 each
Eligible On: Piper aircraft equipped with PA-18 seat
STC: N/A
FAA/PMA: N/A
Weight: 0.8 lbs.
Material: Aluminum, powder coated black
Purpose: Seat bottom lifts up for easy access to under seat batteries.
Installation: Requires drilling and riveting.
Misc. Information: Hinges and rivets included with purchase.
More
Piper Clamp On Rear Shoulder Harness Attach Bracket
Please see ACE-00-23.561-01 FAA Policy RE Shoulder Harness Installations.
P/N: 3232-2
Price: $149.25 each
Eligible On: Piper J-3C, J-3F, J-3L, J-5A, J-5B, J-5C, PA-11, PA-11S, PA-12, PA-12S, PA-18, PA-18 150, PA18A 150, PA-18S 150, PA-18AS 150, PA-18 105, PA-18S 105, PA-18A, PA-18 125, PA-18A 125, PA-18S 125, PA-18A 135, PA-18S 135, and PA-18AS 135 Series Aircraft
STC: N/A
FAA/PMA: Supplement 1
Material: 304 Stainless Steel
Weight: Please see installation instructions ...
More
Piper Clamp On Front Shoulder Harness Attach Bracket
Please see ACE-00-23.561-01 FAA Policy RE Shoulder Harness Installations.
P/N: 3232-1
Price: $90.25 each
Eligible On: Piper J-3C, J-3F, J-3L, J-5A, J-5B, J-5C, PA-11, PA-11S, PA-12, PA-12S, PA-18, PA-18 150, PA18A 150, PA-18S 150, PA-18AS 150, PA-18 105, PA-18S 105, PA-18A, PA-18 125, PA-18A 125, PA-18S 125, PA-18A 135, PA-18S 135, and PA-18AS 135 Series Aircraft
STC: N/A
FAA/PMA: Supplement 1
Material: 304 Stainless Steel
Weight: Please see installation instructions for prope...
More
PA-18 Heavy Duty Brake Reinforcing Channel
P/N: 4231
Price: $90.25 each
Eligible On: PA-18 Series Aircraft
STC: N/A
FAA/PMA: Supplement 1
Weight: 0.7 lb's
Material: 4130N Steel
Purpose: Direct replacement for Piper P/N 12944-00.
Installation: Same as stock part.
Misc. Information: Heavy duty replacement prevents cracking. Powder coated gray.
More
Universal Cabin Heater Box
P/N: AD-18-CHB
Price: $396.50 each
Eligible On: Piper Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 8 oz.
Material: Stainless Steel
Installation: Mounting holes align with stock PA-18 firewall. Cable routing same as Piper PA-18 Series Aircraft.
Misc. Information: Stainless steel box prevents corrosion.
More
Remote Compass Mounting Bracket
P/N: 1033
Price: $180.25 each
Eligible On: J3 thru PA-22
STC: STC SA144AL
FAA/PMA: Supplement 1
Weight: Approximately 3 lbs.
Material: 2024 T-3 Aluminum
Purpose: To mount remote compass transmitter.
Installation: Bracket attaches to the AFT side of the front spar, left hand or right hand, at approximately 140.5" outboard from the #1 inboard rib. Be sure the cable is long enough to enable the compass to be connected outside of the wing.
Misc. Information: May ...
More
Piper Rear Control Stick Cover
P/N: 3343
Price: $427.50 each
Eligible On: Piper J3, PA-11, PA-18, and PA-19 Series Aircraft
STC: N/A, Minor alteration
FAA/PMA: Approved
Weight: 1.2 lbs.
Material: Fiberglass and reinforced plastic
Purpose: Prevents foreign objects and loose cargo from interfering with the rear control stick mechanism.
Installation: Please see Installation Instructions.
More
Piper Cargo Net
P/N: 3234-P
Price: $808.50 each
Eligible On: J3, PA-11, PA-12, PA-14, PA-18, and PA-19 Series Aircraft
STC: SA02452AK
FAA/PMA: Supplement 45
Weight: Approximately 4 lbs.
Material: Black net with 1" webbing
Purpose: Prevents cargo from shifting forward during hard landing or heavy turbulence.
Installation: Please see Installation Instructions.
Misc. Information: Purchase includes your choice of a clamp on or weld on hardware kit.
More
Removable Rear Seat Crossbar
P/N: 3146
Price: $345 each
Eligible On: PA-18 and PA-19 Series Aircraft
STC: SA681AL
FAA/PMA: Supplement 1
Weight: 15 oz.
Material: 4130N Square Tubing
Purpose: Allows rear seat cross bar to be removed for easier loading of aircraft.
Installation: No welding required, install takes about 1 hour.
Misc. Info: Crossbar must be installed prior to flight to prevent serious structural failure to the fuselage side structure in the event of a hard landing or over gro...
More
Universal Defroster Kit
P/N: 3242-12 (PA-12, PA-14, PA-20, PA-22, Taylor Craft, Champ, and Husky) or 3242-18 (J3, PA-11, and PA-18)
Price: $664.25 each
Eligible On: Piper J3, PA-11, PA-12, PA-14, PA-18, PA-20, PA-22 Series Aircraft as well as Taylor Craft, Champ, and Husky Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 2.5 lbs.
Material: Stainless Steel Airbox with Aluminum Outlets
Purpose: Windshield Defroster
Installation: Please see Installation Instructions.
Misc. Information: Kit inclu...
More
Rear Seat Heater Kit
P/N: 3175
Price: $757 each
Eligible On: PA-18 Series Aircraft with Lycoming Engines
STC: SA02094AK - FOR REFERENCE USE
FAA/PMA: Supplement 4
Weight: 2.4 lbs.
Material: Diverter box and push pull cables are stainless steel, hoses are 2" CEET and 2" SCAT.
Purpose: The carburetor heat shroud and new cabin heat valve are utilized to provide aircraft with heating to the rear seat passenger.
Installation: No welding required. Install time estimated at 8 hours. Kit can...
More
Piper Battery Rack for Front Seat
P/N: 3304
Price: $440.25 each
Eligible On: PA-18 and PA-19 Series Aircraft
STC: SA02156AK
FAA/PMA: Supplement 1
Weight: 1.2 lb's without battery, 16.4 lb's with approved battery
Material: Stainless Steel
Purpose: Modification to reduce weight approximately 18.4 lb's when replacing stock rack and battery. Moves battery location to underneath the front seat in the seat base frame.
Installation: Please see Installation Instructions . Install time depends upon mecha...
More
