Piper Vertical Fin

  P/N: U40592-000 Price: $270 each Eligible On: Piper J3C-40, J3C-50, J3C-50S, J3C-65, J3C-65S, J3F-50, J3F-50S, J3F-60, J3F-60S, J3F-65, J3F-65S, J3L, J3L-S, J3L-65, J3L-65S (S/N 4133 & on), J4, J4A, J4A-S (S/N 4-1368 & on Except 4-1378), J5A, J5A-80, J5B, J5C, PA-11, PA-11S, PA-12, PA-12S, PA-14, PA-18, PA-18S, PA-18-105, PA-18S-105, PA-18-125, PA-18S-125, PA-18AS-125, PA-18-135, PA-18S-135, PA-18A-135, PA-18AS-135, PA-18-150, PA-18S-150, PA-18A-150, and PA-18AS-150 Serie...
More

Piper Weld On Front Shoulder Harness Attach Bracket

  P/N: 3232W-1 Price $67.50 each Eligible On: PA-12, PA-12S, PA-18, PA-18S, PA-19, and PA-19S Series Aircraft STC: SA02488AK FAA/PMA: Supplement 54 Weight: 5.4 oz. Material: 4130N Purpose: Attaches shoulder harness to fuselage frame. Installation: Please see Installation Instructions. Misc. Information: STC sold separately for $265 each.      
More

Piper Weld On Rear Shoulder Harness Attach Bracket

  P/N: 3232W-2 Price: $67.50 each Eligible On: PA-12, PA-12S, PA-18, PA-18S, PA-19, and PA-19S Series Aircraft STC: SA02488AK FAA/PMA: Supplement 54 Weight: 5.4 oz. Material: 4130N Purpose: Attaches shoulder harness to fuselage frame. Installation: Please see Installation Instructions. Misc. Information: STC sold separately for $265 each.  
More

Rear Seat Heater Kit

  P/N: 3175 Price: $735 each Eligible On: PA-18 Series Aircraft with Lycoming Engines STC: SA02094AK FAA/PMA: Supplement 4 Weight: 2.4 lbs. Material: Diverter box and push pull cables are stainless steel, hoses are 2" CEET and 2" SCAT. Purpose: The carburetor heat shroud and new cabin heat valve are utilized to provide aircraft with heating to the rear seat passenger. Installation: No welding required. Install time estimated at 8 hours. Kit can be installed at the...
More

Remote Compass Mounting Bracket

  P/N: 1033 Price: $175 each Eligible On: J3 thru PA-22 STC: STC SA144AL FAA/PMA: Supplement 1 Weight: Approximately 3 lbs. Material: 2024 T-3 Aluminum Purpose: To mount remote compass transmitter. Installation: Bracket attaches to the AFT side of the front spar, left hand or right hand, at approximately 140.5" outboard from the #1 inboard rib. Be sure the cable is long enough to enable the compass to be connected outside of the wing. Misc. Information: May be ...
More

Removable Rear Seat Crossbar

  P/N: 3146 Price: $335 each Eligible On: PA-18 and PA-19 Series Aircraft STC: SA681AL FAA/PMA: Supplement 1 Weight: 15 oz. Material: 4130N Square Tubing Purpose: Allows rear seat cross bar to be removed for easier loading of aircraft. Installation: No welding required, install takes about 1 hour. Misc. Info: Crossbar must be installed prior to flight to prevent serious structural failure to the fuselage side structure in the event of a hard landing or over gro...
More

Shaw Filler Neck Adapter

  P/N: 3188 Price: $265 without cap, or Current Market Price with cap Eligible On: Cessna 180, 182, 185, 188, 206, 207, and 210 Series Aircraft STC: SA2325NM (covers 180), SA2326NM (covers 182), SA2327NM (covers 185), SA2328NM (covers 188), SA2329NM (covers 206), SA2330NM (covers 207), and SA2331NM (covers 210) FAA/PMA: Approved Weight: 5 oz. without cap, 8.4 oz. with cap Material: Aluminum and Stainless Steel Purpose: Filler neck adapter replaces flush fuel caps wit...
More

Silver Ski Springs

  P/N: 2097 Price: $165 each Eligible On: Approved Model List STC: SA4624NM FAA/PMA: Supplement 1 Weight: 2.2 lbs. Material: Cadmium Plated Steel Purpose: Improves ski rigging tension in cold weather. Installation: Installation instructions included with STC. Misc. Information: For ski equipped airplanes that have rigid welded tubular steel type main landing gear VNE equal to 160 MPH or less Maximum weight 2500 lbs.
More

Strobe Light Mounting Bracket

  P/N: 2087 Price: $285 each Eligible On: PA-18 STC: SA638AL FAA/PMA: Supplement 1 Weight: 7.6 oz Material: Fiberglass and Aluminum Purpose: Allows installation of a rudder mounted anti-collision light or strobe light. Installation: Instructions included with STC paperwork Misc. Info: Compatibility with Whelen A470 and Grimes 30-0465-5 strobe lights has been determined.        
More

Survival Axe

  P/N: AD18-SA Price: $178.50 each Eligible On: PA-18 and Husky style landing gear STC: N/A FAA/PMA: N/A Weight: 4 lb's. Purpose: Allows survival axe to be secured to outside of cabin structure. Installation: Uses 2 clamps secured with stainless steel pins. 1 clamps on the forward landing gear tube, and the other clamps on the aft landing gear tube. Recommended to be mounted on left hand gear with axe head facing forward. The axe is not to be used as a step. Misc....
More

Universal Defroster Kit

  P/N: 3242-12 (PA-12, PA-14, PA-20, PA-22, Taylor Craft, Champ, and Husky) or 3242-18 (J3, PA-11, and PA-18) Price: $645 each Eligible On: Piper J3, PA-11, PA-12, PA-14, PA-18, PA-20, PA-22 Series Aircraft as well as Taylor Craft, Champ, and Husky Aircraft STC: N/A FAA/PMA: N/A Weight: 2.5 lbs. Material: Stainless Steel Airbox with Aluminum Outlets Purpose: Windshield Defroster Installation: Please see Installation Instructions. Misc. Information: Kit includes...
More

Wing Jack

  PN: AD18-WJ (with jack) or AD18-WJ-2 (without jack) Price: $425 with jack, or $365 without jack STC: N/A FAA/PMA: N/A Weight: 37 lbs. with jack Material: 6061-T6 Purpose: Helps lift high wing aircraft lighter than 2500 lbs. for the installation and removal of skis or tires. Misc. Information: If you choose to use your own jack a bushing will need to be installed in the lift bracket. We supply a modified high lift jack that can quickly be returned to normal operatio...
More