Belly Pan Clean Out Kit

P/N: 3285 NAME: Belly Pan Clean Out Kit PRICE: $285.00 ELIGIBLE ON: PA-18 STC's: No FAA-PMA'd: Yes WEIGHT: 1.8 Lbs. MATERIAL: - 2024-T3 Aluminum pan - Mild steel receptacle plates PURPOSE: - To allow clean out of AFT, lower fuselage section and to gain access to jack screw & pulleys. INSTALLATION: - Normally installed at time of rebuild - Welding is required for loin fastener receptacle plates. MISC INFO:
More

Installation of PA-18 Cathedral Ceilings, STC ONLY

[PDF] STC SA02419AK, Reference Use Only.pdf P/N: STC Only NAME: Installation of PA-18 Cathedral ceilings PRICE: $245.00 / STC Only ELIGIBLE ON: Piper PA-18, PA-12S SERIES AIRCRAFT STC's: SA02419AK FAA-PMA'd: N/A WEIGHT: N/A MATERIAL: 4130N PURPOSE: To remove diagonal tube aft of rear spar carry through. This modification allows easier access for loading and unloading cargo aft of rear seat. INSTALLATION: This modification should b...
More

Installation of PA-18 Front Seat, STC Only

STC SA02418AK, Reference Use Only.pdf P/N: STC Only NAME: Installation of PA-18 Front Seat PRICE: $545.00 / STC Only ELIGIBLE ON: Piper PA-12, PA-12S Series Aircraft STC's: SA02418AK FAA-PMA'd: N/A WEIGHT: N/A MATERIAL: 4130N PURPOSE: This modification allows the installation of a Piper PA-18 front seat, that is adjustable and superior in strength. INSTALLATION: This installation can be welded in or a clamp in/weld in modification...
More

Lumber Rack

Lumber Rack Installation for PA-18.pdf P/N: 12-LR, 18-LR NAME: Lumber Rack PRICE: $775.00 ELIGIBLE ON: Will fit -12, -14, -18 style aircraft STC's: No FAA-PMA'd: No WEIGHT: 19.9 Lbs without load MATERIAL: - Mild Steel - 4130N Steel - Powder coated Call for Colors PURPOSE: To have external loads - Building materials & a wide range of items. INSTALLATION: Clamps to the lower longeron in 3 places on each side of the aircraft. ...
More

STC for Fuselage Side Mounted Lower Baggage Door

[PDF] FUSELAGE SIDE MOUNTED LOWER BAGGAGE DOOR MODIFICATION.pdf P/N: 8029, Alaskan Aircraft Products NAME: STC for fuselage side mounted lower baggage door PRICE: $350.00 / STC Only ELIGIBLE ON: PA-18, PA-18 Series aircraft STC's: SA02378AK FAA-PMA'd: No WEIGHT: N/A MATERIAL: N/A PURPOSE: - This modification allows the aircraft owner to install a large lower baggage door on the right hand side of the fuselage. INSTALLATION: - This ...
More

Tail Brace Beef Up

P/N: 1022-12, 1022-18 NAME: TAIL BRACE BEEF UP PRICE: $185.00 ELIGIBLE ON: WILL FIT -12, -18 AIRCRAFT STC's: NO FAA-PMA'd: NO - LOG BOOK ENTRY, MINOR ALTERATION WEIGHT: 12 OZ MATERIAL: - 4130N STEEL TUBING - POWDER COATED GREY PURPOSE: TO STRENGTHEN THE AFT TAIL SECTION TO PREVENT TAIL FROM TWISTING. INSTALLATION: - CAN BE WELDED IN OR CLAMPED IN - THE BEST TIME FOR INSTALLATION IS WHEN FABRIC IS OFF THE AIRCRAFT. MISC INFO: ...
More

Top Deck X Brace Installation, STC ONLY

[PDF] STC SA02011AK, Reference Use Only.pdf P/N: SYC Only NAME: Top Deck X Brace Installation PRICE: $265.00 / STC Only ELIGIBLE ON: Piper PA-18 Series Aircraft STC's: SA02011AK FAA-PMA'd: N/A WEIGHT: N/A MATERIAL: 4130N PURPOSE: This modification is accomplished to increase the structural strength of the top deck. INSTALLATION: This is a welding modification. Normally accomplished during the fuselage rebuilding process. MIS...
More

Top Deck X Brace Modification, STC ONLY

[PDF] STC SA02379AK, Reference Use Only.pdf P/N: STC Only NAME: Top Deck X Brace Modification PRICE: $265.00 / STC Only ELIGIBLE ON: Piper PA-12, PA-12S Series Aircraft STC's: SA02379AK FAA-PMA'd: N/A WEIGHT: N/A MATERIAL: 4130N PURPOSE: This modification strengthens upper top deck to insure and increase the structural integrity of the upper cabin. INSTALLATION: This is a weld in modification and is normally accomplished during th...
More

Weld on Aft Float Fittings

[PDF] Weld On Float Fittings for PA-18 Installation.pdf P/N: 3143-12 NAME: WELD ON AFT FLOAT FITTINGS PRICE: $685.00 / Pair ELIGIBLE ON: PA-12, PA-14 STC's: SA00132SE FAA-PMA'd: YES WEIGHT: 2 LBS / Pair MATERIAL: 4130N STEEL PURPOSE: - DESIGNED TO REPLACE THE CLAMP ON STYLE FITTING AND TO PROVIDE A CLEANER STRONGER INSTALLATION. INSTALLATION: - NORMALLY ACCOMPLISHED AT TIME OF REBUILD, BUT IF FABRIC CAN BE REMOVED TO ACCOMMODATE ...
More