F. Atlee Dodge Ski Dollies

  P/N: X-1-SD Price: $795 per pair Eligible On: F. Atlee Dodge X-1 Ski's only STC: N/A FAA/PMA: N/A Weight: 37.5 lbs. per side Material: Mild steel and 4130N, powder coated Atlee Yellow. Purpose: Allows aircraft equipped with F. Atlee Dodge X-1 ski's to be lifted and moved from place to place. Installation: Slides into lower ski cross tube located on ski pedestal. Misc. Information: Purchase includes high speed trailer wheels and tires. Ski dollies are NOT inte...
More

Fuel Cap Keeper

  P/N: 3267-KPR Price: $24.50 each Eligible On: Piper and Cessna Aircraft STC: N/A FAA/PMA: N/A Weight: .4 oz. Material: Stainless steel Purpose: Retains fuel cap to prevent loss while refueling. Installation: Clips on to the fuel cap. No tools required. Misc. Information: Chain is 7 inches long. Great for use on float planes as caps can fall into the water during refueling.        
More

Gold Ski Springs

  P/N: 2127 Price: $165 each Eligible On: Approved Model List STC: SA4624NM FAA/PMA: Supplement 1 Weight: 2.2 lbs. Material: Cadmium Plated Steel Purpose: Improves ski rigging tension in cold weather. Installation: Installation instructions included with STC. Misc. Information: For ski equipped airplanes that have rigid welded tubular steel type main landing gear VNE equal to 160 MPH or less Maximum weight 2500 lbs.
More

Hydraulic Reservoir Tank

  P/N: 2080-S1, 2080-M1, and 2080-L1 Price: $285 each Eligible On: Aircraft equipped with hydraulic ski's STC: N/A FAA/PMA: N/A Weight: 2080-S1 is 8.9 oz., 2080-M1 is 10.5 oz., and 2080-L1 is 11.7 oz. Material: 6061-T6 Aluminum, powder coated yellow Purpose: Provides hydraulic reservoir needed for hydraulic wheel ski installations. Installation: Bolts on with supplied strap. Misc. Information: 3 sizes available. 2080-S1 has a length of approximately 3.5 inches,...
More

Northern Companion Engine Pre-Heaters

  P/N: NC5A (Taildragger) and NC5B (Tricycle) Price: $835 each Eligible On: All Aircraft STC: N/A FAA/PMA: N/A Weight: 6.6 lbs. Material: Stainless Steel Purpose: Allows for pre-heating of aircraft engine in cold weather. Installation: None required. Misc. Information: NC5A dimensions are 6" x 17.25" NC5B dimensions are 6" x 15" Fuel options include 100LL Aviation Gas, Leaded or Unleaded Auto Gas, White Gas, Kerosene, Diesel, or JP4 and JP8 jet fuel ...
More

PA-18 Control Knobs

  P/N: 3311 (Blank), 3312-1 (Mixture), 3312-2 (Carb. Heat), 3312-3 (Cabin Heat/Vent), 3312-4 (Rear Seat Heat), 3312-5 (Windshield Heat/Defrost), and 3312-6 (Fresh Air) Price: $10 each Eligible On: Piper PA-18 Series Aircraft STC: N/A FAA/PMA: Supplement 1 (covers Blank and Mixture), Supplement 1 (covers Blank and Cabin Heat/Vent) Weight: .5 oz. Material: Plastic knob with brass threads. Purpose: 3311 and 3312-1 are direct replacements for Piper P/N 471-053; 3311 and ...
More

Piper Aircraft Tie Down Loop

  P/N: 3218-1 Price: $52.50 each Eligible On: Piper J3, J4, J5, PA-11, PA-12, PA-14, PA-16, PA-18, PA-19, PA-20, and PA-22 Series Aircraft STC: N/A FAA/PMA: Supplement 1 Weight: 2.3 oz. Material: 4130N, powder coated white Purpose: Direct replacement for Piper P/N 12345-04. Installation: Please see Installation Instructions. Misc. Information: Please see our Engineering Design Approval for more information regarding this replacement part.  
More

Piper Short Flap Handle

  P/N: AD12774-04 or AD12774-04-KIT Price: $545 per new handle, or $237 for modification of existing handle Eligible On: PA-18 and PA-19 Series Aircraft STC: Pending Approval FAA/PMA: Pending Approval Weight: .4 lbs. Material: 4130N Purpose: Allows more aileron deflection with flaps down. Installation: Same as standard flap handle. Bolt in, no welding required. Misc. Information: You may choose to purchase a new handle or send in your existing handle for modifi...
More

Silver Ski Springs

  P/N: 2097 Price: $165 each Eligible On: Approved Model List STC: SA4624NM FAA/PMA: Supplement 1 Weight: 2.2 lbs. Material: Cadmium Plated Steel Purpose: Improves ski rigging tension in cold weather. Installation: Installation instructions included with STC. Misc. Information: For ski equipped airplanes that have rigid welded tubular steel type main landing gear VNE equal to 160 MPH or less Maximum weight 2500 lbs.
More

Survival Axe

  P/N: AD18-SA Price: $178.50 each Eligible On: PA-18 and Husky style landing gear STC: N/A FAA/PMA: N/A Weight: 4 lb's. Purpose: Allows survival axe to be secured to outside of cabin structure. Installation: Uses 2 clamps secured with stainless steel pins. 1 clamps on the forward landing gear tube, and the other clamps on the aft landing gear tube. Recommended to be mounted on left hand gear with axe head facing forward. The axe is not to be used as a step. Misc....
More

Universal Defroster Kit

  P/N: 3242-12 (PA-12, PA-14, PA-20, PA-22, Taylor Craft, Champ, and Husky) or 3242-18 (J3, PA-11, and PA-18) Price: $535 each Eligible On: Piper J3, PA-11, PA-12, PA-14, PA-18, PA-20, PA-22 Series Aircraft as well as Taylor Craft, Champ, and Husky Aircraft STC: N/A FAA/PMA: N/A Weight: 2.5 lbs. Material: Stainless Steel Airbox with Aluminum Outlets Purpose: Windshield Defroster Installation: Please see Installation Instructions. Misc. Information: Kit includes...
More