PA-12 Lift Strut Reinforcment Bracket

  P/N: 3192-12 Price: $117.50 each Eligible On: PA-12, PA-12S and PA-14 Series Aircraft STC: SA02021AK FAA/PMA: Supplement 9 Weight: 4 oz. Material: 4130N Steel Purpose: Provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. Installation: Please see Installation Instructions. Misc. Information: Powder coated white. If lift strut fitting is bent or has elongated holes it will ...
More

PA-18 Fairing – Leading Edge

  P/N: AD12276-00 (left hand) and AD12276-01 (right hand) Price: $92.50 each Eligible On: Piper PA-18 Series Aircraft STC: N/A FAA/PMA: Supplement 1 (covers left hand), Supplement 1 (covers right hand) Weight: 5.3 oz. Material: 2024 T3 Aluminum, powder coated white. Purpose: Direct replacement for Piper P/N's 12276-00 and 12276-01. Installation: Same as original stock part. Misc. Information: Comes with rubber chafing strip installed.     ...
More

PA-18 Fairing – Plate Attachement

  P/N: AD11719-00 (left hand) and AD11719-01 (right hand) Price: $76.50 each Eligible On: Piper PA-18 Series Aircraft STC: N/A FAA/PMA: Supplement 1 (left hand), Supplement 1 (right hand) Weight: 1.9 oz. Material: 2024 T3 Aluminum Purpose: Direct replacements for Piper P/N's 11719-00 and 11719-01. Installation: Same as original stock part. Misc. Information: Part is supplied as bare aluminum. This part will not fit if wing flaps are extended to fuselage. ...
More

PA-18 Fairing – Wing Top

  P/N: AD11523-00 Price: $47.50 each Eligible On: Piper PA-18 Series Aircraft STC: N/A FAA/PMA: Supplement 1 Weight: 9 oz. Material: 2024 T3 Aluminum Purpose: Direct replacement for Piper P/N 11523-00. Installation: Same as original stock part. Misc. Information: Part is supplied as bare aluminum with nut plate and angle installed. This part will not fit if wing flaps are extended to fuselage.      
More

PA-18 Fairing – Wing, Lower AFT

  P/N: AD12275-00 (left hand) and AD12275-01 (right hand) Price: $72.50 each Eligible On: Piper PA-18 Series Aircraft STC: N/A FAA/PMA: Supplement 1 (covers left hand), Supplement 1 (covers right hand) Weight: 4.6 oz. Material: 2024 T3 Aluminum Purpose: Direct replacement for Piper PN's 12275-00 and 12275-01. Installation: Same as original stock part. Misc. Information: Part supplied as bare aluminum with tab and screw included. This part will not fit if wing f...
More

PA-18 Fairing – Wing, Lower Center

  P/N: AD12274-00 (left hand) and AD12274-02 (right hand) Price: $37.50 each Eligible On: Piper PA-18 Series Aircraft STC: N/A FAA/PMA: Supplement 1 (left hand), Supplement 1 (right hand) Weight: 5.3 oz. Material: 2024 T3 Aluminum Purpose: Direct replacement for Piper PN's 12274-00 and 12274-02. Installation: Same as original stock part. Misc. Information: Part supplied as bare aluminum.    
More

PA-18 Lift Strut Reinforcment Bracket

  P/N: 3192-18 Price: $117.50 each Eligible On: PA-18 Series Aircraft STC: SA02026AK FAA/PMA: Supplement 9 Weight: 4 oz. Material: 4130N Steel Purpose: Provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors. Installation: Please see Installation Instructions. Misc. Information: Powder coated white. If lift strut fitting is bent or has elongated holes it will need to be replaced...
More

Piper Aircraft Tie Down Bracket

  P/N: 3197 Price: $117.50 each, normally sold in pairs. Eligible On: PA-12 and PA-18 Series Aircraft STC: PA-12 SA02067AK ; PA-18 SA02066AK FAA/PMA: Supplement 16 Weight: 15 oz. each Material: Stainless steel with aluminum spacers. Purpose: To remove the tie down load from the front lift strut U-channel that is attached to the front spar. Installation: Recommended at the time of wing covering.  
More

Piper Aircraft Tie Down Loop

  P/N: 3218-1 Price: $52.50 each Eligible On: Piper J3, J4, J5, PA-11, PA-12, PA-14, PA-16, PA-18, PA-19, PA-20, and PA-22 Series Aircraft STC: N/A FAA/PMA: Supplement 1 Weight: 2.3 oz. Material: 4130N, powder coated white Purpose: Direct replacement for Piper P/N 12345-04. Installation: Please see Installation Instructions. Misc. Information: Please see our Engineering Design Approval for more information regarding this replacement part.  
More

Piper Gust Locks

  P/N: AD18-GL Price: $115 per pair Eligible On: All Piper Aircraft equipped with fabric wings STC: N/A FAA/PMA: N/A Weight: 1 lb. per pair Material: 6061 T6 Aluminum, powder coated red. Purpose: Prevents control surface damage from wind when aircraft is parked on the ground. Installation: Installs outside of aircraft using bungee cord and tie down ring. Misc. Information: External locks prevent wear to cables and pulleys better than internal gust lock options....
More

Piper Lifting Eyes

  P/N: 3217 Price: $77.50 per pair Eligible On: Piper PA-12 thru PA-22 Series Aircraft STC: N/A FAA/PMA: N/A Weight: 3 oz. Material: 304 Stainless Steel Purpose: Allows aircraft to be hoisted for float, ski, wheel, and tire installations. Installation: Please see Installation Instructions. Misc. Information: This part will not work for J3 or PA-11 aircraft.
More

Wing Jack

  PN: AD18-WJ (with jack) or AD18-WJ-2 (without jack) Price: $425 with jack, or $365 without jack STC: N/A FAA/PMA: N/A Weight: 37 lbs. with jack Material: 6061-T6 Purpose: Helps lift high wing aircraft lighter than 2500 lbs. for the installation and removal of skis or tires. Misc. Information: If you choose to use your own jack a bushing will need to be installed in the lift bracket. We supply a modified high lift jack that can quickly be returned to normal operatio...
More